3.3.3. Control Port Configurations For The 7882J2Kx-Ipasi; Figure 3-4 : Com Port - Serial Port Settings; Figure 3-5 : Com Port - Main Menu - evertz 7882J2KX-IPASI User Manual

3.3.3. Control Port Configurations for the 7882J2KX-IPASI

Communication through the control port allows the module to be controlled and configured by using
WebEASY on a web interface or VistaLINK
®
module, this step is not necessary for setting the control port on the 7882J2KX-IPASI.
1. Connect the Evertz serial upgrade cable (ribbon cable) to the 2x3 header at the front edge of the
7882J2KX-IPASI card.
2. Start a terminal program and configure the port settings.
3. Boot up module and a "Tera Term-platform login" prompt, enter:
•
"customer" for user name <Enter>
•
"customer" for password <Enter>
. When using a 7800FC frame controller to control the
®
Figure 3-4 : COM Port – Serial Port Settings

Figure 3-5 : COM Port - Main Menu

Revision 1.0
7882J2KX-IPASI
Single Channel J2K Encoder/Decoder
Page - 9