Table of Contents
Advertisement
2.4.
CONNECTING THE VIDEO
2.4.1. High Definition Video Input
The high definition program video source should be connected to the HD INPUT BNC. The HD9010TM-
IRIG can be configured to auto detect one of the high definition digital video in the formats shown in Table
2-4 or set manually to match the incoming video type using the Video Standard Menu.
Common
Name
1080i/60
1920 x 1080
1080i/59.94
1920 x 1080
1080i/50
1920 x 1080
1080p/30sF
1920 x 1080
1080p/29.97sF
1920 x 1080
1080p/25sF
1920 x 1080
1080p/24sF
1920 x 1080
1080p/23.98sF
1920 x 1080
720p/60
1280 x 720
720p/59.94
1280 x 720
The Video LED indicator will be On when there is video present matching the selected video type. When it
is blinking it indicates that there is video present but the VIDEO TYPE menu item does not match the input
video format.
The HD9010TM requires a stable video input for normal operation.
2.4.2. High Definition Video Output
The HD BYPASS and HD OUTPUT outputs contain the input high definition video with RP215 ancillary
data (VANC) and optional characters keyed in. Connect one of these outputs to any input on your system
that accepts SMPTE 292M serial digital video.
BYPASS output may be protected by an optional bypass relay (+HBP option). When the relay is active,
the HD BYPASS output is directly connected to the HD INPUT, and the other two HD OUTPUTS will have
no video output.
INSTALLATION
HD9010TM-IRIG HDTV Time Code Master / IRIG-B Reader Manual
Pixels /
Frame Rate
Active Lines
29.97 (30/1.001)
29.97 (30/1.001)
23.98 (24/1.001)
59.94 (60/1.001)
Table 2-4: High Definition Video Input Formats
Progressive
/Interlace
30
I
I
25
I
30
P (sF)
P (sF)
25
P (sF)
24
P (sF)
P (sF)
60
P
P
The three outputs are identical except that the HD
Revision 2.1
SMPTE
Valid Genlock
Standard
Types
274M
525i/30
274M
NTSC
274M
PAL
274M
525i/30
274M
NTSC
274M
PAL
274M
625i/48
274M
625i/47.96
296M
525i/30
296M
NTSC
Page 2-4
Advertisement
Table of Contents
