Offset-List Configuration - Planet Networking & Communication GS-6320 Series User Manual

The displayed settings are:
Object
• Interface
• Passive Interface
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.

4.4.11.5 Offset-list Configuration

This is RIP offset-list configuration table. The maximum number of the RIP offset-list entries is 130.
The displayed settings are:
Object
• Delete
• VLAN ID
• Direction
• Access List Name
• Offset Metric
Buttons
Click to add new entry.
User's Manual of GS-6320 and MGS-6320 Managed Switches
Description
Interface identification.
Enable the interface as RIP passive-interface.
Description
Check to delete the entry. It will be deleted during the next save.
The VLAN interface which the offset list applies to. The range of VLAN ID is from
0 to 4095. 0 means that the offset list applies to all interfaces.
The direction to add the offset to routing metric update.
In: Apply to the inbound direction.
Out: Apply to the outbound direction.
Access-list name. The valid name string length is from 1 to 31 and allows all
printable characters excluding space character.
The offset to incoming or outgoing routing metric.The allowed range is 0 to 16.
304