Table of Contents
Advertisement
4.6.2.4 RADIUS Overview
This page provides an overview of the status of the RADIUS servers configurable on the authentication configuration page. The
RADIUS Authentication/Accounting Server Overview screen in
Figure 4-6-2-4: RADIUS Authentication/Accounting Server Overview Page Screenshot
The page includes the following fields:
RADIUS Authentication Server Status Overview
Object
• #
• IP Address
• Authentication
Port
• Authentication
Status
• Accounting
Port
• Accounting
Status
User's Manual of GS-6320 and MGS-6320 Managed Switches
Description
The RADIUS server number. Click to navigate to detailed statistics for this server.
The IP address and UDP port number (in <IP Address>:<UDP Port> notation) of this server.
UDP port number for authentication.
The current status of the server. This field takes one of the following values:
Disabled: The server is disabled.
Not Ready: The server is enabled, but IP communication is not yet up and running.
Ready: The server is enabled, IP communication is up and running, and the RADIUS module
is ready to accept access attempts.
Dead (X seconds left): Access attempts were made to this server, but it did not reply within
the configured timeout. The server has temporarily been disabled, but will get re-enabled
when the dead-time expires. The number of seconds left before this occurs is displayed in
parentheses. This state is only reachable when more than one server is enabled.
UDP port number for accounting
The current status of the server. This field takes one of the following values:
Disabled: The server is disabled.
Not Ready: The server is enabled, but IP communication is not yet up and running.
Ready: The server is enabled, IP communication is up and running, and the RADIUS module
is ready to accept access attempts.
Figure 4-6-2-4
appears.
354
Advertisement
Table of Contents
