Planet Networking & Communication GS-6320 Series User Manual page 113

The page includes the following fields:
Object
• Session
•
Mode
• Type
• VLAN ID
• Reflector Port
User's Manual of GS-6320 and MGS-6320 Managed Switches
Figure 4-3-1-4-3: Mirror Configuration Page Screenshot
Description
Select session id to configure.
To Enabled/Disabled the mirror or Remote Mirroring function
Mirror
The switch is running on mirror mode.
The source port(s)
Source
The switch is a source node for monitor flow.
The source port(s),
RMirror destination
The switch is an end node for monitor flow.
The destination port(s)
The VLAN ID points out where the monitor packet will copy to. The default VLAN ID is
200.
The reflector port is a method to redirect the traffic to Remote Mirroring VLAN. Any device
connected to a port set as a reflector port loses connectivity until the Remote Mirroring is
disabled.
In the stacking mode, you need to select switch ID to select the correct device.
If you shut down a port, it cannot be a candidate for reflector port.
113
and destination port are located on this switch.
reflector port are located on this switch.
is located on this switch.