Area Range - Planet Networking & Communication GS-6320 Series User Manual

• No Summary
Buttons
Click to add new entry.
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.

4.4.8.4 Area Range

This is OSPF6 area range configuration table. It is used to summarize the intra area paths from a specific address
range in one summary-LSA(Type-0x2003) and advertised to other areas or configure the address range status as
'DoNotAdvertise' which the summary-LSA(Type-0x2003) is suppressed. The area range configuration is used for
Area Border Routers (ABRs) and only router-LSAs(Type-0x2001) and network-LSAs (Type-0x2002) can be
summarized. The AS-external-LSAs(Type-0x4005) cannot be summarized because the scope is OSPF6
autonomous system (AS). The AS-external-LSAs(Type-0x4007) cannot be summarized because the feature is not
supported yet
The displayed settings are:
Object
• Delete
• Area ID
• Network Address
• Mask Length
• Advertised
User's Manual of GS-6320 and MGS-6320 Managed Switches
The value is true to configure the inter-area routes do not inject into this stub
area.
Description
Check to delete the entry. It will be deleted during the next save.
The OSPF6 area ID.
IPv6 network address.
IPv6 network mask length.
When the value is true, it summarizes intra area paths from the address range in
one Inter-Area Prefix LSA(Type-0x2003) and advertised to other areas.
Otherwise, the intra area paths from the address range are not advertised to
282