Planet Networking & Communication GS-6320 Series User Manual page 321

Figure 4-5-2-2: QoS Egress Port Schedule and Shapers Page Screenshot
The page includes the following fields:
Object
• Schedule Mode
• Queue Shaper Enable
• Queue Shaper Rate
• Queue Shaper Unit
• Queue Shaper Excess
• Queue Scheduler
Weight
• Queue Scheduler
Percent
User's Manual of GS-6320 and MGS-6320 Managed Switches
Description
Controls whether the scheduler mode is "Strict Priority" or "Weighted" on this
switch port.
Controls whether the queue shaper is enabled for this queue on this switch port.
Controls the rate for the queue shaper.
This value is restricted to 100-1000000 when the "Unit" is "kbps", and it is
restricted to 1-13200 when the "Unit" is "Mbps".
The default value is 500.
Controls the unit of measure for the queue shaper rate as "kbps" or "Mbps".
The default value is "kbps".
Controls whether the queue is allowed to use excess bandwidth.
Controls the weight for this queue.
This value is restricted to 1-100. This parameter is only shown if "Scheduler
Mode" is set to "Weighted".
The default value is "17".
Shows the weight in percent for this queue. This parameter is only shown if
"Scheduler Mode" is set to "Weighted".
321