Planet Networking & Communication GS-6320 Series User Manual page 386

• Target IP Address
• Target IP Mask
• ARP Sender MAC
Match
• RARP Target MAC
Match
• IP/Ethernet Length
• IP
• Ethernet

IP Parameters
The IP parameters can be configured when Frame Type "IPv4" is selected.
Object
•
IP Protocol Filter
User's Manual of GS-6320 and MGS-6320 Managed Switches
When "Host" or "Network" is selected for the target IP filter, you can enter a
specific target IP address in dotted decimal notation.
When "Network" is selected for the target IP filter, you can enter a specific target
IP mask in dotted decimal notation.
Specify whether frames can hit the action according to their sender hardware
address field (SHA) settings.
■
0: ARP frames where SHA is not equal to the SMAC address.
■
1: ARP frames where SHA is equal to the SMAC address.
■
Any: Any value is allowed ("don't-care").
Specify whether frames can hit the action according to their target hardware
address field (THA) settings.
■
0: RARP frames where THA is not equal to the SMAC address.
■
1: RARP frames where THA is equal to the SMAC address.
■
Any: Any value is allowed ("don't-care").
Specify whether frames can hit the action according to their ARP/RARP
hardware address length (HLN) and protocol address length (PLN) settings.
■
0: ARP/RARP frames where the HLN is equal to Ethernet (0x06) and the
(PLN) is equal to IPv4 (0x04).
■
1: ARP/RARP frames where the HLN is equal to Ethernet (0x06) and the
(PLN) is equal to IPv4 (0x04).
■
Any: Any value is allowed ("don't-care").
Specify whether frames can hit the action according to their ARP/RARP
hardware address space (HRD) settings.
■
0: ARP/RARP frames where the HLD is equal to Ethernet (1).
■
1: ARP/RARP frames where the HLD is equal to Ethernet (1).
■
Any: Any value is allowed ("don't-care").
Specify whether frames can hit the action according to their ARP/RARP protocol
address space (PRO) settings.
■
0: ARP/RARP frames where the PRO is equal to IP (0x800).
■
1: ARP/RARP frames where the PRO is equal to IP (0x800).
■
Any: Any value is allowed ("don't-care").
Description
Specify the IP protocol filter for this ACE.
■
Any: No IP protocol filter is specified ("don't-care").
■
Specific: If you want to filter a specific IP protocol filter with this ACE,
choose this value. A field for entering an IP protocol filter appears.
386