: Click to undo any changes made locally and revert to previously saved values.
Dual power input is required for maximum PoE loading.
Check your power supply's output capability before modifying the value of Power Supply Budget[W]
4.7.4 Port Configuration
This section allows the user to inspect and configure the current PoE port settings as
GS-6320 802.3at PoE+ Switch
The page includes the following fields:
Object
• PoE Mode
• Schedule
• Priority
User's Manual of GS-6320 and MGS-6320 Managed Switches
– PoE Port Configuration
Figure 4-7-4: Power over Ethernet Configuration Screenshot
Description
There are three modes for PoE mode.
Enable: enable PoE function..
Disable: disable PoE function.
Schedule: enable PoE function in schedule mode.
Indicates the schedule profile mode. Possible profiles are:
Profile1
Profile2
Profile3
Profile4
The Priority represents PoE ports priority. There are three levels of power priority
named Low, High and Critical.
The priority is used in case the total power consumption is over the total power
budget. In this case, the port with the lowest priority will be turned off, and power
Figure 4-7-4
412
shows.