Ospfv3; Global Configuration - Planet Networking & Communication GS-6320 Series User Manual

4.4.8 OSPFv3

4.4.8.1 Global Configuration

This is OSPF6 router configuration table. It is a general group to configure the OSPF6 common router parameters.
The displayed settings are:
Object
•
OSPF6 Router Mode
• Default Router ID
• Static Redistribute
• Connected
Redistribute
• Administrative istance
Buttons
: Click to reset the current OSPF6 process.
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
User's Manual of GS-6320 and MGS-6320 Managed Switches
Description
Enable/Disable the OSPF6 router mode.
The OSPF6 Router ID in IPv4 address format(A.B.C.D).
When the router's OSPF6 Router ID is changed, if there is one or more fully
adjacent neighbors in current OSPF6 area, the new router ID will take effect after
restart OSPF6 process. Notice that the router ID should be unique in the
Autonomous System and value '0.0.0.0' is invalid since it is reserved for the
default algorithm.
Auto: The default algorithm will choose the largest IP address assigned to the
router.
Specific: User specified router ID.
The allowed range is from 0.0.0.1 to 255.255.255.254.
The OSPF redistributeenabled for the static routes or not.
Enable: The static routes are redistributed.
Disable: The static routes are not redistributed
The OSPF redistribute enabled for connected route or not.
Enable: The connected interfaces are redistributed.
Disbale: The connected interfaces are not redistributed.
The OSPF6 administrative distance.
280