Routing; Ip Configuration - Planet Networking & Communication GS-6320 Series User Manual

4.4 Routing

4.4.1 IP Configuration

The IP Configuration includes the IP Configuration, IP Interface and IP Routes. The configured column is used to view or
change the IP configuration. The maximum number of interfaces supported is 128 and the maximum number of routes is 128.
The screen in Figure 4-4-1 appears.
The current column is used to show the active IP configuration.
Object
• IP Configurations
Domain Name
Mode
DNS Server
User's Manual of GS-6320 and MGS-6320 Managed Switches
Figure 4-4-1: IP Configuration Page Screenshot
Description
Configure the Switch Domain Name
Configure whether the IP stack should act as a Host or a Router. In
Host mode, IP traffic between interfaces will not be routed. In Router
mode traffic is routed between all interfaces.
This setting controls the DNS name resolution done by the switch. The
following modes are supported:
 No DNS server
No DNS server will be used..
 Configure IPv4 or IPv6
Explicitly specify the name of local domain.
Make sure the configured domain name meets your organization's
given domain.
 From any DHCPv6 interfaces
The first domain name offered from a DHCPv6 lease to a
DHCPv6-enabled interface will be used.
 From this DHCPv6 interface
248