Planet Networking & Communication GS-6320 Series User Manual page 41

L3 gigabit/10 gigabit managed switch
Table of Contents

Advertisement

MGB-TLB40
MGB-TLA80
YES
MGB-TLB80
10Gbps SFP+ (10G Ethernet/10GBASE)
Model
DDM
MTB-RJ
-
MTB-SR
YES
MTB-LR
YES
MTB-TSR
YES
MTB-TLR
YES
10Gbps SFP+ (10GBASE-BX, Single Fiber Bi-directional SFP)
Model
DDM
Speed (Mbps)
MTB-LA20
YES
MTB-LB20
MTB-LA40
YES
MTB-LB40
MTB-LA60
YES
MTB-LB60
It is recommended to use PLANET SFP/SFP+ on the Managed Switch. If you insert an SFP/SFP+
transceiver that is not supported, the Managed Switch will not recognize it.
1.
Before we connect the GS-6320 and MGS-6320 to the other network device, we have to make sure both sides of the SFP
transceivers are with the same media type, for example, 1000BASE-SX to 1000BASE-SX, 1000BASE-LX to
1000BASE-LX.
2.
Check whether the fiber-optic cable type matches with the SFP transceiver requirement.
To connect to 1000BASE-SX SFP transceiver, please use the multi-mode fiber cable with one side being the male
duplex LC connector type.
To connect to 1000BASE-LX SFP transceiver, please use the single-mode fiber cable with one side being the male
duplex LC connector type.
Connecting the Fiber Cable
1.
Insert the duplex LC connector into the SFP/SFP+ transceiver.
2.
Connect the other end of the cable to a device with SFP/SFP+ transceiver installed.
3.
Check the LNK/ACT LED of the SFP/SFP+ slot on the front of the Managed Switch. Ensure that the SFP/SFP+
transceiver is operating correctly.
4.
Check the Link mode of the SFP/SFP+ port if the link fails. To function with some fiber-NICs or Media Converters, user
User's Manual of GS-6320 and MGS-6320 Managed Switches
1000
WDM(LC)
Single Mode
1000
WDM(LC)
Single Mode
1000
WDM(LC)
Single Mode
Connector
Speed (Mbps)
Interface
10G
Copper
10G
LC
10G
LC
10G
LC
10G
LC
Connector
Fiber Mode
Interface
10G
WDM(LC)
Single Mode
10G
WDM(LC)
Single Mode
10G
WDM(LC)
Single Mode
10G
WDM(LC)
Single Mode
10G
WDM(LC)
Single Mode
10G
WDM(LC)
Single Mode
40km
1550nm
80km
1490nm
80km
1550nm
Fiber Mode
Distance
-
30m
Multi Mode
Up to 300m
Single Mode
10km
Multi Mode
Up to 300m
Single Mode
10km
Distance
Wavelength (TX)
20km
1270nm
20km
1330nm
40km
1270nm
40km
1330nm
60km
1270nm
60km
1330nm
41
-40 ~ 75 ℃
1310nm
-40 ~ 75 ℃
1550nm
-40 ~ 75 ℃
1490nm
Wavelength (nm)
Operating Temp.
0 ~ 70 ℃
-
0 ~ 60 ℃
850nm
0 ~ 60 ℃
1310nm
-40 ~ 75 ℃
850nm
-40 ~ 75 ℃
1310nm
Wavelength (RX) Operating Temp.
0 ~ 60 ℃
1330nm
0 ~ 60 ℃
1270nm
0 ~ 60 ℃
1330nm
0 ~ 60 ℃
1270nm
0 ~ 60 ℃
1330nm
0 ~ 60 ℃
1270nm

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mgs-6320 series

Table of Contents