Planet Networking & Communication GS-6320 Series User Manual page 17

Powerful Security
The GS-6320 and MGS-6320 offer a comprehensive Layer 2 to Layer 4 access control list (ACL) for enforcing security to the
edge. It can be used to restrict to network access by denying packets based on source and destination IP address, TCP/UDP
port number or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and
MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be
prevented to ensure user privacy.
Enhanced Security and Traffic Control
The GS-6320 and MGS-6320 also provide DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to
prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrator can now
construct highly-secure corporate networks with considerably less time and effort than before.
User-friendly Secure Management
For efficient management, the GS-6320 and MGS-6320 are equipped with console, web and SNMP management interfaces.
With the built-in web-based management interface, it offers an easy-to-use, platform independent management and
configuration facility. The GS-6320 and MGS-6320 support SNMP and it can be managed via any management software based
on the standard SNMP v1 or v2 Protocol. For reducing product learning time, the GS-6320 and MGS-6320 offer Cisco-like
command via Telnet or console port and customer doesn't need to learn new command from these switches. Moreover, the
GS-6320 and MGS-6320 offer the remotely secure management by supporting SSH, SSL and SNMP v3 connection where the
packet content can be encrypted at each session.
Fl
exible and Extendable Solution
The 4 mini-GBIC SFP slots built in the GS-6320 and MGS-6320 support dual speed as it features 100BASE-FX and
1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules. Now the administrator can flexibly choose the
suitable SFP transceiver according to not only the transmission distance, but also the transmission speed required. The
distance can be extended from 550 m to 2 km (multi-mode fiber) and to 10/20/30/40/50/70/120 km (single-mode fiber or WDM
fiber). They are well suited for applications within the enterprise data centers and distributions.
Intelligent SFP/SFP+ Diagnosis Mechanism
The GS-6320 and MGS-6320 support SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network
administrator to easily monitor real-time parameters of the SFP and SFP+ transceivers, such as optical output power, optical
input power, temperature, laser bias current, and transceiver supply voltage.
User's Manual of GS-6320 and MGS-6320 Managed Switches
17