Table of Contents
Advertisement
• Action
• Rate Limiter
• CPU
• Counter
• Conflict
Buttons
Auto-refresh
: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the page.
4.6.5.2 Access Control List Configuration
This page shows the Access Control List (ACL), which is made up of the ACEs defined on this switch. Each row describes the
ACE that is defined. The maximum number of ACEs is 512 on each switch.
Click on the lowest plus sign to add a new ACE to the list. The reserved ACEs used for internal protocol, cannot be edited or
deleted, the order sequence cannot be changed and the priority is highest. The Access Control List Configuration screen in
Figure 4-6-5-2
appears.
The page includes the following fields:
Object
• ACE
• Ingress Port
User's Manual of GS-6320 and MGS-6320 Managed Switches
Indicates the forwarding action of the ACE.
■
Permit: Frames matching the ACE may be forwarded and learned.
■
Deny: Frames matching the ACE are dropped.
Indicates the rate limiter number of the ACE. The allowed range is 1 to 16. When
Disabled is displayed, the rate limiter operation is disabled.
Forward packet that matched the specific ACE to CPU
The counter indicates the number of times the ACE was hit by a frame.
Indicates the hardware status of the specific ACE. The specific ACE is not
applied to the hardware due to hardware limitations.
Figure 4-6-5-2: Access Control List Configuration Page Screenshot
Description
Indicates the ACE ID.
Indicates the ingress port of the ACE. Possible values are:
■
All: The ACE will match all ingress port.
■
Port: The ACE will match a specific ingress port.
380
Advertisement
Table of Contents
