Neighbors Configuration; Passive Interface Configuration - Planet Networking & Communication GS-6320 Series User Manual

4.4.11.3 Neighbors Configuration

This is RIP neighbor connection table. It is used to configure the RIP router to send RIP updates to specific
neighbors using the unicast, broadcast, or network IP address after update timer expiration. The maximum number
of the RIP neighbor entries is 128.
The displayed settings are:
Object
• Delete
• Neighbor Address
Buttons
Click to add new entry.
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.

4.4.11.4 Passive Interface Configuration

This is RIP router interface configuration table.
User's Manual of GS-6320 and MGS-6320 Managed Switches
Description
Check to delete the entry. It will be deleted during the next save.
Ipv4 address encoded as "a.b.c.d", where a-d is a base-10 human readable
integer in the range [0-255]The neighbor address can be an unicast(excluding
loopback), broadcast, or network IP address.
303