Planet Networking & Communication GS-6320 Series User Manual page 256

Router ID
Default Passive Mode
Default Metric
Static Redistribute
Metric Type
Static Redistribute
Metric Value
Connected
Redistribute Metric
Type
Connected
Redistribute Metric
Value
Buttons
Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
User's Manual of GS-6320 and MGS-6320 Managed Switches
The OSPF Router ID in IPv4 address format(A.B.C.D).
When the router's OSPF Router ID is changed, if there is one or more fully adjacent neighbors in
current OSPF area, the new router ID will take effect after restart OSPF process. Notice that the
router ID should be unique in the Autonomous System and value '0.0.0.0' is invalid since it is
reserved for the default algorithm.

Auto: The default algorithm will choose the largest IP address assigned to the router.

Specific: User specified router ID.
Configure all interfaces as passive-interface by default.When an interface is configured as a
passive-interface, the OSFP routing updates sending is suppressed, therefore the interface does
not establish adjacencies (No OSPF Hellos). The subnet of all interfaces (both passive and active)
is advertised by the OSPF router.
User specified default metric value for the OSPF routing protocol. The field is significant only when
the arugment 'IsSpecificDefMetric' is TRUE

Auto: The default metric is calculated automatically based on the routing protocols.

Specific: User specified default metric.

The OSPF redistributed metric type for the connected interfaces.
None: The static routes are not redistributed.

Specified Metric Value: User specified metric for the static routes.

External Type 1: External Type 1 of the static routes.

External Type 2: External Type 2 of the static routes.
User specified metric value for the connected interfaces. The field is significant only when the
arugment 'ConnectedRedistMetricType' is configured as 'metricTypeSpecified'.
The allowed range is 0 to 1677214.
The OSPF redistributed metric type for the static routes.

None: The connected interfaces are not redistributed.

Specified Metric Value: User specified metric for the connected interfaces routes.

External Type 1: External Type 1 of the connected interfaces routes.

External Type 2: External Type 2 of the connected interfaces routes.
User specified metric value for the static routes.The field is significant only when the arugment
'StaticRedistMetricType' is configured as 'metricTypeSpecified'.
The allowed range is 0 to 1677214.
Click to reset the current OSPF process.
256