Lacp Neighbor Port Status - Planet Networking & Communication GS-6320 Series User Manual

4.3.2.7 LACP Neighbor Port Status

This page provides a status overview for the
shown.
The displayed settings are:
Object
• Port
• State
• Aggr ID
• Partner Key
• Partner Port
• Partner Port Priority
• Activity
• Timeout
• Aggregation
• Synchronization
• Collecting
• Distributing
• Defaulted
• Expired
User's Manual of GS-6320 and MGS-6320 Managed Switches
LACP neighbor status for all ports. Only ports that are part of an LACP group are
Description
The switch port number.
The current port state:
•
Down: The port is not active.
•
Active: The port is in active state.
•
Standby: The port is in standby state.
The aggregation group ID which the port is assigned to.
The key assigned to this port by the partner.
The partner port number associated with this link.
The priority assigned to this partner port .
The LACP mode of the group (Active or Passive).
The timeout mode configured for the partner port (Fast or Slow).
Show whether the partner considers this link to be "aggregateable"; i.e., a
potential candidate for aggregation.
Show whether the partner considers this link to be "IN_SYNC"; i.e., it has been
allocated to the correct LAG, the group has been associated with a compatible
Aggregator, and the identity of the LAG is consistent with the System ID and
operational Key information transmitted.
Show if collection of incoming frames on this link is enabled.
Show if distribution of outgoing frames on this link is enabled.
Show if the partners Receive machine is using Defaulted operational Partner
information.
Show if that the partners Receive machine is in the EXPIRED state.
127