Neighbor Status - Planet Networking & Communication GS-6320 Series User Manual

4.4.8.8 Neighbor Status

This is OSPF6 IPv6 neighbor status table. It is used to provide the OSPF6 neighbor status information.
The displayed settings are:
Object
• Neighbor ID
• Priority
• State
• Dead Time
• Interface Address
• Interface
• efault
Buttons
Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
Auto-refresh :
Click to refresh the page immediately.
:
User's Manual of GS-6320 and MGS-6320 Managed Switches
Description
The Neighbor ID.
The priority of OSPF6 neighbor. It indicates the priority of the neighbor router.
This item is used when selecting the DR for the network. The router with the
highest priority becomes the DR.
The state of OSPF6 neighbor. It indicates the functional state of the neighbor
router.
Dead timer. It indicates the amount of time remaining that the router waits to
receive an OSPF6 hello packet from the neighbor before declaring the neighbor
down.
The IP address.
The network interface.
To set the switch port to use the default VL
286