IDEC MICRO/I HG2J-7U Hardware Manual page 83

4.9 USB Cable Lock Pin Attachment
When using the USB device, attach the USB Cable Lock Pin to prevent disconnecting the USB cable from the HG2G-5T
HG1G.
1
Insert the USB cable into the USB2 port.
2
Strain the "Edge part" of the USB Cable Lock Pin, and insert the "Edge part" to the 2 holes lower the USB2 port.
Edge part
HG2G-5T
3
Fasten the USB Clamp Band around the USB cable and the "Clamp part", secure them tightly.
HG2G-5T
Fasten the USB Clamp Band without the space between the "Clamp part" and it, and the inclination.
YES
NO
With a gap
Only USB2 for HG2G-5T
*1
Clamp part
Lower holes
NO
Slanted
MICRO/I Hardware Manual
HG1G
Lower holes
HG1G
NO
Slanted
4 HG2G-5T, HG1G
1
*1
,
1-73