IDEC MICRO/I HG2J-7U Hardware Manual page 75

4.5 Specifications
■ Applicable Standards
Safety Standard
*1
EMC Standard
■ Environmental Specifications
Type Number
Ambient Operating Temperature
Ambient Operating Humidity
Ambient Storage Temperature
Ambient Storage Humidity
Altitude
Pollution Degree
Corrosion Immunity
■ Electrical Specifications
Rated Voltage
Power Consumption
Not using USB Interface (USB2)
Power Voltage Range
Allowable Momentary Power Interruption
Inrush Current
Dielectric Withstand Voltage
Construction Specifications
■
Vibration Resistance
Shock Resistance
When using the HG2G-5T, HG1G as the EMC Standard Approved Products, refer to the precautions on the emission.
*1
When using a USB interface(USB2) by 151mA or more, operating temperature will be -20 to +50°C.
*2
UL508, ANSI/ISA 12.12.01,
CSA C22.2 No.142 (c-UL),
CSA C22.2 No.213 (c-UL)
IEC/EN 61131-2
HG2G-5T
-20 to +60°C (no freezing)
10 to 90% RH (no condensation)
-20 to +70°C (no freezing)
10 to 90% RH (no condensation)
0 to 2000m
2
Free from corrosive gases
12V/24V DC
8W maximum
4W maximum
10.2 to 28.8V DC
10 ms maximum (Power supply: 20.4 to 28.8V DC)
1 ms maximum (Power supply: 10.2 to 20.4V DC)
40A maximum
1000V AC, 10mA, 1 minute (between power and earth terminals)
5 to 8.4Hz amplitude 3.5mm,
8.4 to 150Hz acceleration 9.8m/s
10 times on each of three mutually perpendicular axes
(IEC 61131-2)
2
147m/s , 11ms (3 shocks on each of three mutually perpendicular axes)
(IEC 61131-2)
MICRO/I Hardware Manual
4 HG2G-5T, HG1G
HG1G
*2
-20 to +55°C (no freezing)
2
1
1-65