Usb Cable Lock Pin Attachment - IDEC MICRO/I HG2J-7U Hardware Manual

3.9 USB Cable Lock Pin Attachment

When using the USB device, attach the USB Cable Lock Pin to prevent disconnecting the USB cable from the HG4G/3G,
HG2G-5F.
1
Insert the USB cable into the USB2 port.
2
Strain the "Edge part" of the USB Cable Lock Pin, and insert the "Edge part" to the 2 holes upper the USB2 port.
Edge part
HG4G/3G
Upper Holes
3
Fasten the USB Clamp Band around the USB cable and the "Clamp part", secure them tightly.
HG4G/3G
Fasten the USB Clamp Band without the space between the "Clamp part" and it, and the inclination.
YES
NO
With a gap
Clamp part
HG2G-5F
HG2G-5F
NO
Slanted
MICRO/I Hardware Manual
Upper Holes
NO
Slanted
3 HG4G/3G, HG2G-5F
1
1-55