1.5 Specifications
■
Applicable Standards
Safety Standards
EMC Standards
■
Environmental Specifications
Ambient Operating Temperature
Ambient Operating Humidity
Ambient Storage Temperature
Ambient Storage Humidity
Altitude
Pollution Degree
Corrosion Immunity
■
Electrical Specifications
Rated Voltage
Power Consumption
Not using USB Interface (USB1, USB2) 5W maximum
Backlight OFF
Power Voltage Range
Allowable Momentary Power Interruption
Inrush Current
Dielectric Withstand Voltage
■
Construction Specifications
Vibration Resistance
Shock Resistance
*1 For details about the output current limitation of the USB interface due to the ambient operating temperature, refer to
"Restrictions due to mounting orientation" on page 1-11.
UL61010-1, UL61010-2-201, UL121201
CSA C22.2 No.61010-1-12 (c-UL), CSA C22.2 No.61010-2-201 (c-UL),
CSA C22.2 No.213 (c-UL)
IEC/EN 61131-2
*1
-20 to +60°C
(no freezing)
10 to 90% RH (no condensation)
-20 to +70°C (no freezing)
10 to 90% RH (no condensation)
0 to 2000m
2
Free from corrosive gases
12V/24V DC
13W maximum
3W maximum
10.2 to 28.8V DC
10 ms maximum (Power supply: 20.4 to 28.8V DC)
1 ms maximum (Power supply: 10.2 to 20.4V DC)
40A maximum
AC500V, 10mA, 1 minute (between power and earth terminals)
5 to 8.4Hz amplitude 3.5mm,
8.4 to 150Hz acceleration 9.8m/s
10 times on each of three mutually perpendicular axes
(IEC 61131-2)
2
147m/s
, 11ms (3 shocks on each of three mutually perpendicular axes)
(IEC 61131-2)
MICRO/I Hardware Manual
2
1 HG2J-7U
1
1-5