Table of Contents
Advertisement
5 HG1P
Installing the Hand Strap (HG9Z-PS4)
1
Pass the hand strap through the hand strap mounting part.
Hand Strap Hole
2
Pass the end of the strap through the loop, keep holding the end, and pull it tight.
The Loop of the Strap
Be careful when pulling the strap tight because the strap may be damaged if excessive force is used.
Installing the Wall-Mounting Hook (HG9Z-PK3)
1
Fit the indented surface of the wall-mounted hook into the HG1P.
2
Use the wall-mounted hook screws (M3×10), and tighten in two locations to the recommended tightening torque (0.6
N·m).
Wall-Mounted Hook
Wall-Mounted Hook Screw
1-92
Hand Strap
The End of the Strap
Mounting Hole for Wall-Mounted Hook
MICRO/I Hardware Manual
Advertisement
Table of Contents
