IDEC MICRO/I HG2J-7U Hardware Manual page 143

YES: Supported, NO: Not supported
Name
Connector
HG9Z-XCT11
Conversion Cable
HG9Z-4DCPN02
HG9Z-3DA2PN02
*1
Protective Sheet
HG9Z-3D8PN02
HG9Z-2D5PN05
Protective Cover HG9Z-2E2PN03
Memory Card HG9Z-XMS2
HG9Z-XJ3PN05
Expansion Module
HG9Z-XJ4PN05
Clamp
HG9Z-XJ5PN05
HG9Z-PMT10LPN02
L-shaped Terminal
Block Connector for
I/O Module
HG9Z-PMT11LPN02
The protective sheet is UV resistant, however, resistance against direct sunlight in outdoor usage is not guaranteed.
*1
Type No.
To convert from D-sub 25-pin to 9-pin
(used when replacing from HG4F/3F/2F
to HG4G/3G, HG2G-5F)
Length: 16cm
For HG4G
2 pcs/pack
For HG3G-A
2 pcs/pack
For HG3G-8
2 pcs/pack
For HG2G-5F/-5T
5 pcs/pack
For HG2G-5F/-5T
To Cover the front of the main unit
3 pcs/pack
SD memory card (2GB, Class6)
For installing the expansion modules on
the back of the main unit (Short).
5 pcs/pack
For total width 17.6 to 41.1 mm.
For installing the expansion modules on
the back of the main unit (Long).
5 pcs/pack
For total width 47.0 to 69.4 mm.
For installing the expansion modules on
the back of the main unit (Extra-Long).
5 pcs/pack
For total width 70.5 to 93.0 mm.
For MicroSmart I/O Module (10-pole)
2 pcs/pack
For MicroSmart I/O Module (11-pole)
2 pcs/pack
MICRO/I Hardware Manual
Description
1 Optional items
HG4G HG3G HG2G-5F
YES YES YES
YES NO NO
NO YES NO
NO YES NO
NO NO YES
NO NO YES
YES YES YES
YES YES YES
YES YES YES
YES YES NO
YES YES YES
YES YES YES
3
3-5