IDEC MICRO/I HG2J-7U Hardware Manual page 23

Cautions for using the HG2J-7U connected to a personal computer
●
When connecting the HG2J-7U to a personal computer via the USB Interfaces, the HG2J-7U or the personal computer
may break down depending on the conditions of the personal computer. Make sure of the following cautions, in order
to prevent an accident.
• If the personal computer has a 3-pin power plug or power plug with a ground lead type, make sure to use a plug
socket including a ground input electrode or ground the earth lead, respectively.
• If the personal computer has a 2-pin power plug without ground lead, follow the procedure below when connect
the HG2J-7U to the personal computer.
(1) Pull out the power plug of the personal computer from the AC outlet.
(2) Connect the HG2J-7U to the personal computer.
(3) Insert the power plug of the personal computer into the AC outlet.
Recommended Tools
●
Tool Name
Flat blade screwdriver
Crimping tool
Stripping tool
Model Number (Order Number)
Normal type SDS 0.4×2.5×75 (9009030000)
With insulated cover
SDIS 0.4×2.5×75 (9008370000)
MICRO/I Hardware Manual
S3TL-D04-25-75
S3TL-CR06D
PZ6/5 (90011460000)
S3TL-ST06
STRIPAX(9005000000)
1 HG2J-7U
Manufacturer
Weidmüller
IDEC
Weidmüller
IDEC
Weidmüller
IDEC
Weidmüller
1-13
1