Analog I/O Modules; Using Analog I/O Modules; Analog I/O Module Parameter Settings - IDEC MICRO/I HG2J-7U Hardware Manual

2

Analog I/O Modules

2.1 Using Analog I/O
Analog I/O modules are available that allow the MICRO/I to directly handle analog data such as voltage, current, and
temperature. There are ten types of analog I/O modules that differ by the number of analog inputs and outputs and
the operation mode. These analog I/O modules can be used by connecting them to the back of the MICRO/I.
Analog I/O module inputs support voltage, current, thermocouples, resistance thermometers, and thermistors. Analog
I/O module outputs support voltage and current.
To use Analog I/O modules, configures the settings on the Module Configuration dialog box. For details on
configuration methods, refer to Chapter 4 "Module Configuration Dialog Box" in the WindO/I-NV4 User's Manual. For
details on the analog I/O module parameter settings, refer to "2.2 Analog I/O Module Parameter Settings" on page 2-
13.

2.2 Analog I/O Module Parameter Settings

Analog I/O Module Parameter Settings are configured for each channel. The parameters to configure differ according
to the analog I/O module type and I/O type. Please configure the parameter settings according the application in the
Analog Module Configuration dialog box.
For details on configuration methods, refer to Chapter 4 "Module Configuration Dialog Box" in the WindO/I-NV4 User's
Manual.
HG2J-7U HG5G-V HG4G-V
Modules
MICRO/I Hardware Manual
HG4G HG3G-V HG3G HG2G-V HG2G-5F
2 Analog I/O Modules
2
HG2G-5T HG1G HG1P
2-13