Specifications - IDEC MICRO/I HG2J-7U Hardware Manual

3.5 Specifications

■ Applicable Standards
Safety Standard
*1
EMC Standard
Ship Classification Standard
■ Environmental Specifications
Ambient Operating Temperature
Ambient Operating Humidity
Ambient Storage Temperature
Ambient Storage Humidity
Altitude
Pollution Degree
Corrosion Immunity
■ Electrical Specifications
Type Number
Rated Voltage
Power Consumption
Not using USB Interface (USB2) and
Expansion Module Interface (EXT)
Power Voltage Range
Allowable Momentary Power
Interruption
Inrush Current
Dielectric Withstand Voltage
■ Construction Specifications
Vibration Resistance
Shock Resistance
*1 When using the HG4G/3G, HG2G-5F as the EMC Standard Approved Products, or when using the HG4G/3G, HG2G-5F as the
Ship Classification Standard Approved Products, attach a ferrite core (ZCAT3035-1330 manufactured by TDK Corporation) to
the power cables and the communication cables.
Ferrite Core：ZCAT3035-1330（TDK）
UL508, ANSI/ISA-12.12.01
CSA C22.2 No.142 (c-UL), CSA C22.2 No.213 (c-UL)
IEC/EN 61131-2
*1
ABS, DNV, LR, NK
0 to +50°C (no freezing)
10 to 90% RH (no condensation)
-20 to +60°C (no freezing)
10 to 90% RH (no condensation)
0 to 2000m
2
Free from corrosive gases
HG4G
24V DC
27W maximum
18W maximum
20.4 to 28.8V DC
10 ms maximum
30A maximum
AC1000V, 10mA, 1 minute (between power and earth terminals)
5 to 8.4Hz amplitude 3.5mm,
8.4 to 150Hz acceleration 9.8m/s
10 times on each of three mutually perpendicular axes
(IEC 61131-2)
2
147m/s , 11ms (3 shocks on each of three mutually perpendicular axes)
(IEC 61131-2)
MICRO/I Hardware Manual
HG3G-A HG3G-8
25W maximum
15W maximum
2
3 HG4G/3G, HG2G-5F
1
HG2G-5F
19W maximum
10W maximum
1-45