Table of Contents
Advertisement
3 HG4G/3G, HG2G-5F
■
HG2G-5F (5.7 inch)
(2)
(3)
(8)
No.
(1)
POWER LED
(2)
Display
(3)
Touch Panel
(4)
Power Supply Terminal
(5)
Serial Interface (COM2)
(6)
Serial Interface (COM1)
(7)
Audio Interface (AUDIO OUT)
(8)
Ethernet Interface (LAN)
(9)
USB Interface (USB1)
(10) USB Interface (USB2)
(11) Memory Card Interface (SD)
(12) SD Memory Card Access Lamp
(13) Expansion Module Interface (EXT)
(14) Battery Cover
(15) Terminating Resistor Selector Switch For COM2 RS422/485 interface
(16) Audio Interface (AUDIO IN)
(17) Video Interface (VIDEO IN)
*1 This is applicable for HG4G/3G with a video interface only.
1-42
(11)
(12)
(15)
(1)
(5) (6) (10) (9) (4)
Name
Green (lit):
Not lit:
TFT color LCD
Analog resistive membrane type
Connector: Terminal Block 3-pin (Screw fastened type)
RS232C, RS422/485
Connector: Terminal Block 9-pin (Screw fastened type)
Maximum cable length: 15m (RS232C), 1200m (RS422/RS485)
RS232C, RS422/485
Connector: D-sub 9-pin
Maximum cable length: 15m (RS232C), 1200m (RS422/RS485)
LINE OUT (Stereo),
*1
Recommended minimum load: 10kΩ
Connector: Mini Jack (φ3.5mm)
IEEE802.3u 10BASE-T/100BASE-TX
Connector: RJ-45 (With Auto MDI/MDI-X function)
Maximum cable length: 100m
USB2.0 (Device)
Connector: Mini-B
USB2.0 (Host)
Connector: Type-A Output current: 5V 500mA
For SD memory card
For IDEC MICROSmart Expansion Modules
LINE IN terminal (Stereo)
*1
Input impedance : 60kΩ
Connector: Mini Jack (φ3.5mm)
NTSC/PAL
*1
Connector: Pin Jack
MICRO/I Hardware Manual
(13) (14)
Description
Normal Operation (Power is ON.)
Power is off.
-
-
Advertisement
Table of Contents
