Usb Cable Lock Pin Attachment - IDEC MICRO/I HG2J-7U Hardware Manual

2 HG5G/4G/3G/2G-V

2.9 USB Cable Lock Pin Attachment

When using the USB device, attach the USB Cable Lock Pin to prevent disconnecting the USB cable from the HG5G/4G/
3G/2G-V.
1
Insert the USB cable into the USB2 port.
2
Strain the "Edge part" of the USB Cable Lock Pin, and insert the "Edge part" to the 2 holes upper the USB2 port.
Edge part
HG5G/4G/3G-V
Upper Holes
3
Fasten the USB Clamp Band around the USB cable and the "Clamp part", secure them tightly.
HG5G/4G/3G-V
Fasten the USB Clamp Band without the space between the "Clamp part" and it, and the inclination.
YES
NO
With a gap
1-34
Clamp part
HG2G-V
NO
Slanted
MICRO/I Hardware Manual
HG2G-V
Upper Holes
NO
Slanted