IDEC MICRO/I HG2J-7U Hardware Manual page 149

1 Warranty Period
The Products are warranted for 3 years from the date of purchase, or from the date of delivery completion.
2 Extent of warranty
IDEC CORPORATION is responsible for failures or defects of the Products during the above warranty period, either a
replacement part will be provided or the defective parts of the Products will be repaired free of charge. If such failure
or defects should occur, please offer them to the distributor, dealer or IDEC CORPORATION with the materials in
which the date of purchase is specified.
1) The Products are used or operated beyond the conditions or environment range as described in catalog,
specifications or instruction; or
2) The failure or defects of the Products arise from the cause other than the Products; or
3) The Products are improved, modified or altered by the party other than IDEC; or
4) The failure or defects and damages of the Products arise from the usage of the Product in the way that is not
intended; or
5) The failure or defects and damages of the Products arise from the cause beyond IDEC's control including, but not
limited to, fire, earthquake, flood, lightning, other natural disasters, and acts of God; or
6) The failure or defects and damages of the Products arise from the relocation, transportation or drop after you
purchase the Products; or
7) The failure or defects and damages of the Products arise from improper installation; or
8) Maintenance and inspection are not carried out in accordance with instruction.
* Customers assume their own risk in programming products, Company will not be held liable for damages as a
result of improper programming.
IDEC CORPORATION DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITTNESS FOR A
PARTICULAR USE OR PURPOSE, AS WELL AS LIABILITY FOR INCIDENTAL, SPECIAL, INDIRECT, CONSEQUENTIAL OR
OTHER DAMAGES RELATING TO THE PRODUCTS
3 Extent of service
The price of the Products will not include the fee for any service such as sending technicians and engineers, IDEC
CORPORATION will charge you the fee for the following:
1) Instruction for installment and visiting for test operation, including, but not limited to creating application software
and operation tests; and
2) Maintenance and inspection, arrangement and repair; and
3) Technical assistance and technical education; and
4) Product test and inspection based on you request.
Specifications and other descriptions in this manual are subject to change without notice.
Information in this manual is current as of September, 2023.
2023 IDEC Corporation, All Rights Reserved.
B-2336(0)
About the Warranty of the products