Table of Contents
Advertisement
System Mode
●
Press the System Mode at the top of the Maintenance Screen. The Top Page Screen appears.
IDEC HG G SERIES
SYSTEM MODE TOP PAGE
Run
Offline
Main Menu
MAC Address 00:03:7B:F0:12:A8
IP Address 192.168.0.1(DHCP)
2010/OCT/14/THU 14:56:44
ENG/JPN
BRIGHTNESS 31
Initial Setting, Self Diagnosis and Initialization of the data, etc can be executed in the System Mode.
Adjusting the Brightness
●
The brightness of the HG5G/4G/3G/2G-V display can be adjusted on the Adjust Brightness Screen.
1
Press the Adjust Brightness at the bottom of the Maintenance Screen. The Adjust Brightness Screen appears.
Maintenance
System Mode
Device Monitor
Adjust Brightness
2
Press the << and >> at the bottom the Adjust Brightness Screen to adjust the contrast to the optimal setting.
Maintenance
Adjust Brightness
3
Press the X at the top-right to close the Adjust Brightness Screen.
To adjust the brightness in the System Mode, use the << and >> buttons located at the bottom of the Top
Page.
IDEC HG G SERIES
SYSTEM MODE TOP PAGE
Run
MAC Address 00:03:7B:F0:12:A8
IP Address 192.168.0.1(DHCP)
2010/OCT/14/THU 14:56:44
BRIGHTNESS 31
Offline
Main Menu
ENG/JPN
MICRO/I Hardware Manual
2 HG5G/4G/3G/2G-V
1
1-37
Advertisement
Table of Contents
