Change Administrator's Password; View Device Arming/Disarming Information; Network Settings - HIKVISION Ultra Series User Manual

By default, the device time should be synchronized manually. You can set the device time
manually or check Sync. with Computer Time to synchronize the device time with the
computer's time.
Server Address Type/Server Address/NTP Port/Interval
You can set the server address type, server address, NTP port, and interval.

9.6.3 Change Administrator's Password

Steps
1. Click Configuration → System → User Management .
2. Click .
3. Enter the old password and create a new password.
4. Confirm the new password.
5. Click Save.
Caution
The password strength of the device can be automatically checked. We highly recommend you
change the password of your own choosing (using a minimum of 8 characters, including at least
three kinds of following categories: upper case letters, lower case letters, numbers, and special
characters) in order to increase the security of your product. And we recommend you change
your password regularly, especially in the high security system, changing the password monthly
or weekly can better protect your product.
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.

9.6.4 View Device Arming/Disarming Information

View device arming type and arming IP address.
Click Configuration → System → User Management → Arming/Disarming Information .
You can view the device arming/disarming information. Click Refresh to refresh the page.

9.6.5 Network Settings

Set TCP/IP, port, Wi-Fi parameters, ISUP, and platform access.
Note
Some device models do not support Wi-Fi or mobile data settings. Refer to the actual products
when configuration.
Face Recognition Terminal User Manual
84