Access Control Settings - HIKVISION Ultra Series User Manual

9.6.9 Access Control Settings

Set Authentication Parameters
Click Configuration → Access Control → Authentication Settings .
Note
The functions vary according to different models. Refers to the actual device for details.
Click Save to save the settings after the configuration.
If select Terminal 1:
Terminal/Terminal Type/Terminal Model
Select terminal and get the terminal description. They are read-only.
Enable Authentication Device
Enable the authentication function.
Authentication
Select an authentication mode according to your actual needs from the drop-down list.
Recognition Interval
You can set the interval between 2 continuous recognition of a same person during the
authentication. In the configured interval, Person A can only recognized once. If another person
(Person B) has recognized during the interval, Person A can recognized again.
Authentication Interval
You can set the authentication interval of the same person when authenticating. The same
person can only authenticate once in the configured interval. A second authentication will be
failed.
Alarm of Max. Failed Attempts
Enable to report alarm when the card reading attempts reach the set value.
Tampering Detection
Enable the anti-tamper detection for the card reader.
Card No. Reversing
The read card No. will be in reverse sequence after enabling the function.
If select Terminal 2:
Terminal/Terminal Type/Terminal Model
Select terminal and get the terminal description. They are read-only.
Enable Authentication Device
Enable the authentication function.
Face Recognition Terminal User Manual
91