Chapter 3 Installation; Installation Environment; Surface Mounting - HIKVISION Ultra Series User Manual

3.1 Installation Environment

Avoid backlight, direct sunlight, and indirect sunlight.
●
For better recognition, there should be light source in or near the installation environment.
●
If you have to install the device outdoors, you should install a protective shield (optional) for the
●
device.
Note
For details about installation environment, see Tips for Installation Environment.

3.2 Surface Mounting

Steps
Note
The additional force shall be equal to three times the weight of the equipment. The equipment ad
its associated mounting means shall remain secure during the installation. After the installation,
the equipment, including any associated mounting plate, shall not be damaged.
1. According to the datum line on the mounting template, stick the mounting template on the wall
or other surfaces, 1.4 meters higher than the ground.
Face Recognition Terminal User Manual

Chapter 3 Installation

4