Access To Platform - HIKVISION Ultra Series User Manual
Face recognition terminal
Hide thumbs
Also See for Ultra Series:
- User manual (39 pages) ,
- Quick start manual (34 pages) ,
- User manual (126 pages)
Table of Contents
Advertisement
If enable DHCP, the system will assign the IP address and other parameters automatically.
If disable DHCP, you should set the IP address, the subnet mask, and the gateway.
Note
IP address of 192.168.1.64, and 192.168.1.7 are not suggested to use.
Wi-Fi
Select a Wi-Fi and enter the Wi-Fi's password to get connected.
Or tap Add Wi-Fi and enter the Wi-Fi's name and the password to get connected.
3. Optional: Tap Skip to skip network settings.
6.4 Access to Platform
Enable the function and the device can communicate via Hik-Connect. You can add the device to
Hik-Connect mobile client and so on.
Steps
Note
Parts of the device models supports function. Refers to the actual device for details.
1. Enable Access to Hik-Connect, and set the server IP and verification code.
Face Recognition Terminal User Manual
26
Advertisement
Table of Contents
