Press Button To Call - HIKVISION Ultra Series User Manual

Unit No.
Set the device unit No.
Note
If you change the No., you should reboot the device.
If set the device type as Outer Door Station, you can set outer door station No., and community
No.
Outer Door Station No.
If you select outer door station as the device type, you should enter a number between 1 and
99.
Note
If you change the No., you should reboot the device.
Community No.
Set the device community No.
Set Linked Network Settings
Click Configuration → Intercom → Linked Network Settings .
You can set the device type, the SIP server's IP address, and the main station's IP address.
After setting the parameters, you can communicate among the access control device, door station,
indoor station, main station, and the platform.
Click Save to save the settings after the configuration.

9.6.11 Press Button to Call

Steps
1. Click Configuration → Intercom → Press Button to Call .
2. Set the parameters.
- Edit call No. for every button.
- Check Call Management Center to set the button calling center.
Note
If you check Call Management Center and set the call No. as well, call management center has
higher privilege than call No.
Face Recognition Terminal User Manual
97