HIKVISION Ultra Series User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Touch terminals
  5. Ultra Series
  6. User manual

HIKVISION Ultra Series User Manual

Face recognition terminal
Hide thumbs Also See for Ultra Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Face Recognition Terminal
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ultra Series and is the answer not in the manual?

Questions and answers

Related Manuals for HIKVISION Ultra Series

Summary of Contents for HIKVISION Ultra Series

  • Page 1 Face Recognition Terminal User Manual...
  • Page 2 ● Products described in this Document, which may include licenses obtained from third parties. Any part of the Document, including text, pictures, graphics, etc., belongs to Hikvision. No part ● of this Document may be excerpted, copied, translated, or modified in whole or in part by any means without written permission.
  • Page 3 LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY ●...
  • Page 4 Face Recognition Terminal User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could Danger result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could Caution result in equipment damage, data loss, performance degradation, or...
  • Page 5 Face Recognition Terminal User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 6 Face Recognition Terminal User Manual under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.
  • Page 7 CAUTION: To reduce the risk of fire, replace only with the same type and rating of fuse. ● CAUTION: This equipment is for use only with Hikvision’s bracket. Use with other (carts, stands, ● or carriers) may result in instability causing injury.
  • Page 8 Face Recognition Terminal User Manual Burned fingers when handling the fingerprint sensor metal. Wait one-half hour after switching ● off before handling the parts. Install the equipment according to the instructions in this manual. To prevent injury, this ● equipment must be securely attached to the floor/wall in accordance with the installation instructions.
  • Page 9 Face Recognition Terminal User Manual Available Models Product Name Model Face Recognition Terminal DS-K1T680D-E1 DS-K1T680D DS-K1T680DW DS-K1T680DG DS-K1T680DG1 DS-K1T680DF-E1 DS-K1T680DF DS-K1T680DFW DS-K1T680DFG DS-K1T680DFG1 Use only power supplies listed in the user instructions: Model Manufacturer Standard ADS-26FSG-12 12024EPG Shenzhen Honor Electronic Co.,Ltd MSA-C2000IC12.0-24P-DE MOSO Technology Co.,Ltd...

  • Page 10: Table Of Contents

    Face Recognition Terminal User Manual Contents Chapter 1 Overview ........................1 1.1 Overview ..........................1 1.2 Features ..........................1 Chapter 2 Appearance ........................ 2 Chapter 3 Installation ......................... 4 3.1 Installation Environment ......................4 3.2 Surface Mounting ........................4 Chapter 4 Wiring ........................8 4.1 Terminal Description ......................
  • Page 11 Face Recognition Terminal User Manual Chapter 7 Basic Operation ......................32 7.1 Login ............................ 32 7.1.1 Login by Administrator ....................32 7.1.2 Login by Activation Password ..................35 7.1.3 Forgot Password ......................36 7.2 Communication Settings ...................... 38 7.2.1 Set Wired Network Parameters .................. 38 7.2.2 Set Wi-Fi Parameters ....................
  • Page 12 Face Recognition Terminal User Manual 7.7 Set Biometric Parameters ....................58 7.8 Set Access Control Parameters .................... 61 7.9 Time and Attendance Status Settings .................. 63 7.9.1 Disable Attendance Mode via Device ................. 64 7.9.2 Set Manual Attendance via Device ................64 7.9.3 Set Auto Attendance via Device ..................
  • Page 13 Face Recognition Terminal User Manual 9.6 Configuration ........................83 9.6.1 View Device Information ..................... 83 9.6.2 Set Time ........................83 9.6.3 Change Administrator's Password ................84 9.6.4 View Device Arming/Disarming Information .............. 84 9.6.5 Network Settings ......................84 9.6.6 Set Video and Audio Parameters ................88 9.6.7 Set Image Parameters ....................

  • Page 14: Chapter 1 Overview

    Face Recognition Terminal User Manual Chapter 1 Overview 1.1 Overview Face recognition terminal is a kind of access control device for face recognition, which is mainly applied in security access control systems, such as logistic centers, airports, university campuses, alarm centrals, dwellings, etc. 1.2 Features 8-inch touch screen with bezel-less design ●...

  • Page 15: Chapter 2 Appearance

    Face Recognition Terminal User Manual Chapter 2 Appearance Refer to the following contents for detailed information of the face recognition terminal: Figure 2-1 Face Recognition Terminal Diagram Table 2-1 Description of Face Recognition Terminal Description microUSB Interface Note USB to micro USB cable is included in the package. Card Presenting Area Touch Screen IR Light...
  • Page 16 Face Recognition Terminal User Manual Description Fingerprint Module Debugging Port microSIM Card Slot Network Interface Note If the device supports PoE, the network interface supports ● power supply by PoE. If the device supports power supply by PoE and the network ●...

  • Page 17: Chapter 3 Installation

    Face Recognition Terminal User Manual Chapter 3 Installation 3.1 Installation Environment Avoid backlight, direct sunlight, and indirect sunlight. ● For better recognition, there should be light source in or near the installation environment. ● If you have to install the device outdoors, you should install a protective shield (optional) for the ●...
  • Page 18 Face Recognition Terminal User Manual Figure 3-1 Mounting Template...
  • Page 19 Face Recognition Terminal User Manual 2. Drill holes on the wall or other surface according to the Hole 1 and Hole 2 on the mounting template. 3. Remove the cable hole on the mounting plate with tools. 4. Align the holes to the mounting plate and secure the mounting plate on the wall with the 4 supplied screws (Pa4×25).
  • Page 20 Face Recognition Terminal User Manual Figure 3-3 Hang Device 7. Use 2 supplied screw (KM3×6) to secure the device and the mounting plate. Figure 3-4 Secure Device 8. After installation, for the proper use of the device (outdoor use), stick the protection film (parts of models supplied) on the screen.

  • Page 21: Chapter 4 Wiring

    Face Recognition Terminal User Manual Chapter 4 Wiring The device supports connecting to the RS-485 terminal, the door lock, the exit button, the alarm output/input devices, the Wiegand card reader, the access controller, and the power supply. You can wire the peripherals according to the descriptions below. If connect the Wiegand card reader with the access controller, the face recognition terminal can transmit the authentication information to the access controller and the access controller can judge whether to open the door or not.
  • Page 22 Face Recognition Terminal User Manual Figure 4-1 Terminal Diagram The descriptions of the terminals are as follows: Table 4-1 Terminal Descriptions Group Function Color Name Description Group A Power Input +12 ~ 24 VDC Power Supply Black Ground Group B Alarm Input Yellow/Blue Alarm Input 1...

  • Page 23: Wire Normal Device

    Face Recognition Terminal User Manual Group Function Color Name Description Black Ground Yellow/Orange IN2 Alarm Input 2 Alarm Output Yellow/Purple Alarm Output Wiring Yellow/Brown Yellow/Red Group C RS-485 Yellow 485+ RS-485 Wiring Blue 485- Black Ground Wiegand Green Wiegand Wiring 0 White Wiegand Wiring 1...

  • Page 24: Wire Secure Door Control Unit

    Face Recognition Terminal User Manual Figure 4-2 Device Wiring Note You should set the face recognition terminal's Wiegand direction as Input to connect to a ● Wiegand card reader. If connects to an access controller, you should set the Wiegand direction as Output to transmit authentication information to the access controller.

  • Page 25: Wire Fire Module

    Face Recognition Terminal User Manual Figure 4-3 Secure Door Control Unit Wiring Note The secure door control unit should connect to an external power supply separately. The ● suggested external power supply is 12V, 0.5A. For scenarios with high safety requirement, use the secure door control unit wiring first. ●...
  • Page 26 Face Recognition Terminal User Manual Figure 4-4 Wire Device Figure 4-5 Wire Secure Door Control Unit Type 2 Note The fire system (NO and COM, normally open when powering off) is connected with the lock and the power supply in series. When an fire alarm is triggered, the door remains open. In normal times, NO and COM are closed.

  • Page 27: Wiring Diagram Of Door Locked When Powering Off

    Face Recognition Terminal User Manual Figure 4-6 Wiring Device Figure 4-7 Wiring Secure Door Control Unit 4.4.2 Wiring Diagram of Door Locked When Powering Off Lock Type: Cathode Lock, Electric Lock, and Electric Bolt (NC) Security Type: Door Locked When Powering Off...
  • Page 28 Face Recognition Terminal User Manual Scenario: Installed in Entrance/Exit with Fire Linkage Note The Uninterpretable Power Supply (UPS) is required. ● The fire system (NC and COM, normally closed when powering off) is connected with the lock ● and the power supply in series. When an fire alarm is triggered, the door remains open. In normal times, NC and COM are open.
  • Page 29 Face Recognition Terminal User Manual Figure 4-9 Wiring Diagram...

  • Page 30: Chapter 5 Activation

    Face Recognition Terminal User Manual Chapter 5 Activation You should activate the device before the first login. After powering on the device, the system will switch to Device Activation page. Activation via the device, SADP tool and the client software are supported. The default values of the device are as follows: The default IP address: 192.0.0.64 ●...
  • Page 31 Face Recognition Terminal User Manual Figure 5-1 Activation Page Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.

  • Page 32: Activate Via Web Browser

    Get the SADP software from the supplied disk or the official website http:// ● www.hikvision.com/en/ , and install the SADP according to the prompts. The device and the PC that runs the SADP tool should be within the same subnet.

  • Page 33: Activate Device Via Client Software

    Face Recognition Terminal User Manual Steps 1. Run the SADP software and search the online devices. 2. Find and select your device in online device list. 3. Input new password (admin password) and confirm the password. Caution STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.
  • Page 34 Face Recognition Terminal User Manual Steps Note This function should be supported by the device. 1. Enter the Device Management page. 2. Click on the right of Device Management and select Device. 3. Click Online Device to show the online device area. The searched online devices are displayed in the list.

  • Page 35: Chapter 6 Quick Operation

    Face Recognition Terminal User Manual Chapter 6 Quick Operation 6.1 Select Language You can select a language for the device system. After the device activation, you can select a language for the device system. Figure 6-1 Select System Language...

  • Page 36: Set Password Change Type

    Face Recognition Terminal User Manual 6.2 Set Password Change Type After activating the device, you can set the password change type as reserved email address or security questions. Once you forgot the device password, you can change the password via the selected change type.

  • Page 37: Set Network Parameters

    Face Recognition Terminal User Manual Change via Security Questions If you need to change password via security questions, you can tap Change to Security Questions on the right corner. Select the security questions and enter the answers. Click Next. Note You can only select one type to change password.
  • Page 38 Face Recognition Terminal User Manual Figure 6-3 Select Network Note Disconnect the wired network before connecting a Wi-Fi. 2. Tap Next. Wired Network Note Make sure the device has connected to a network.

  • Page 39: Access To Platform

    Face Recognition Terminal User Manual If enable DHCP, the system will assign the IP address and other parameters automatically. If disable DHCP, you should set the IP address, the subnet mask, and the gateway. Note IP address of 192.168.1.64, and 192.168.1.7 are not suggested to use. Wi-Fi Select a Wi-Fi and enter the Wi-Fi's password to get connected.
  • Page 40 Face Recognition Terminal User Manual Figure 6-4 Access to Hik-Connect 2. Tap Next. 3. Optional: Tap Skip to skip the step. 4. Optional: Tap Previous to go to the previous page. Note If you tap Previous to return to the Wi-Fi configuration page, you need to tap the connected Wi- Fi or connect another Wi-Fi to enter the platform page again.

  • Page 41: Privacy Settings

    Face Recognition Terminal User Manual 6.5 Privacy Settings After activation, selecting application mode, and selecting network, you should set the privacy parameters, including the picture uploading and storage. Select parameters according to your actual needs. Figure 6-5 Privacy Upload Captured Pic. When Auth. (Upload Captured Picture When Authenticating) Upload the pictures captured when authenticating to the platform automatically.

  • Page 42: Set Administrator

    Face Recognition Terminal User Manual Save Captured Pic. When Auth. (Save Captured Picture When Authenticating) If you enable this function, you can save the picture when Authenticating to the device. Save Registered Pic. (Save Registered Picture) The registered face picture will be saved to the system if you enable the function. Upload Pic.
  • Page 43 Face Recognition Terminal User Manual Figure 6-6 Add Administrator Page 3. Select a credential to add. Note Up to one credential should be added. : Face forward at the camera. Make sure the face is in the face recognition area. Click capture and click to confirm.
  • Page 44 Face Recognition Terminal User Manual You will enter the authentication page.

  • Page 45: Chapter 7 Basic Operation

    Face Recognition Terminal User Manual Chapter 7 Basic Operation 7.1 Login Login the device to set the device basic parameters. 7.1.1 Login by Administrator If you have added an administrator for the device, only the administrator can login the device for device operation.
  • Page 46 Face Recognition Terminal User Manual Figure 7-1 Admin Login 2. Authenticate the administrator's face, fingerprint or card to enter the home page.
  • Page 47 Face Recognition Terminal User Manual Figure 7-2 Home Page Note The device will be locked for 30 minutes after 5 failed fingerprint or card attempts. 3. Optional: Tap and you can enter the device activation password for login. 4. Optional: Tap and you can exit the admin login page.

  • Page 48: Login By Activation Password

    Face Recognition Terminal User Manual 7.1.2 Login by Activation Password You should login the system before other device operations. If you do not configure an administrator, you should follow the instructions below to login. Steps 1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture to enter password entering page.

  • Page 49: Forgot Password

    Face Recognition Terminal User Manual Figure 7-3 Home Page 7.1.3 Forgot Password If you forget the password during authentication, you can change the password. Steps 1. Hold the initial page for 3 s and slide to the left/right by following the gesture and log in the page.
  • Page 50 Face Recognition Terminal User Manual Figure 7-4 Password Authentication Page 3. Tap Forgot Password. 4. Select a password change type from the list. Note If you have only set 1 password change type, you will go to the corresponded password change page for further settings.

  • Page 51: Communication Settings

    Face Recognition Terminal User Manual Note Make sure the device has added to the Hik-Connect account. a. Download Hik-Connect app. b. Go to More → Reset Device Password . c. Scan the QR code on the device and a verification code will be popped up. Note Tap the QR code to get a larger picture.

  • Page 52: Set Wi-Fi Parameters

    Face Recognition Terminal User Manual Figure 7-5 Wired Network Settings 3. Set IP Address, Subnet Mask, and Gateway. - Enable DHCP, and the system will assign IP address, subnet mask, and gateway automatically. - Disable DHCP, and you should set the IP address, subnet mask, and gateway manually. Note The device's IP address and the computer IP address should be in the same IP segment.
  • Page 53 Face Recognition Terminal User Manual 1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings page. 2. On the Communication Settings page, tap. Figure 7-6 Wi-Fi Settings 3. Enable the Wi-Fi function. 4. Configure the Wi-Fi parameters. - Select a Wi-Fi from the list, and enter the Wi-Fi's password.

  • Page 54: Set Rs-485 Parameters

    Face Recognition Terminal User Manual Note Only digits, letters, and special characters are allowed in the password. 5. Set the Wi-Fi's parameters. - By default, DHCP is enable. The system will allocate the IP address, the subnet mask, and the gateway automatically.
  • Page 55 Face Recognition Terminal User Manual Figure 7-7 Set RS-485 Parameters 3. Select an peripheral type according to your actual needs. Note If you select Access Controller: If connect the device to a terminal via the RS-485 interface, set the RS-485 address as 2. If you connect the device to a controller, set the RS-485 address according to the door No.

  • Page 56: Set Wiegand Parameters

    Face Recognition Terminal User Manual 7.2.4 Set Wiegand Parameters You can set the Wiegand transmission direction. Steps 1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings page. 2. On the Communication Settings page, tap Wiegand to enter the Wiegand tab. Figure 7-8 Wiegand Settings 3.
  • Page 57 Face Recognition Terminal User Manual Figure 7-9 ISUP Settings 2. Enable the ISUP function and set the ISUP server parameters. ISUP Version Set the ISUP version according to your actual needs. Central Group Enable central group and the data will be uploaded to the center group. Main Channel Support N1 or None.

  • Page 58: Platform Access

    Face Recognition Terminal User Manual Set the ISUP server's IP address. Port No. Set the ISUP server's port No. Note Port No. Range: 0 to 65535. Device ID Set device serial no. ISUP Key If you choose V5.0, you should create an account and ISUP key. If you choose other version, you should create an ISUP account only.

  • Page 59: Add Administrator

    Face Recognition Terminal User Manual 7.3.1 Add Administrator The administrator can log in the device backend and configure the device parameters. Steps 1. Long tap on the initial page and log in the backend. 2. Tap User → + to enter the Add User page. 3.

  • Page 60: Add Face Picture

    Face Recognition Terminal User Manual Note The employee ID should be less than 32 characters. And it can be a combination of lower ● letters, upper letters, and numbers. The employee ID should not be duplicated. ● 4. Tap the Name field and input the user name on the soft keyboard. Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user ●...
  • Page 61 Face Recognition Terminal User Manual Note The employee ID should be less than 32 characters. And it can be a combination of lower ● letters, upper letters, and numbers. The employee ID should not be duplicated. ● 4. Tap the Name field and input the user name on the soft keyboard. Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user ●...
  • Page 62 Face Recognition Terminal User Manual Figure 7-10 Add Face Picture 6. Look at the camera. Note Make sure your face picture is in the face picture outline when adding the face picture. ● Make sure the captured face picture is in good quality and is accurate. ●...

  • Page 63: Add Fingerprint

    Face Recognition Terminal User Manual After completely adding the face picture, a captured face picture will be displayed at the upper right corner of the page. 7. Tap Save to save the face picture. 8. Optional: Tap Try Again and adjust your face position to add the face picture again. 9.

  • Page 64: Add Card

    Face Recognition Terminal User Manual Note The same fingerprint cannot be repeatedly added. ● Up to 10 fingerprints can be added for one user. ● You can also use the client software or the fingerprint recorder to record fingerprints. ● For details about the instructions of scanning fingerprints, see Tips for Scanning Fingerprint .

  • Page 65: View Password

    Face Recognition Terminal User Manual Note The card No. cannot be empty. ● Up to 20 characters are allowed in the card No. ● The card No. cannot be duplicated. ● 8. Configure the card type. 9. Set the user role. Administrator The user is the administrator.

  • Page 66: Set Authentication Mode

    Face Recognition Terminal User Manual The user is the administrator. Except for the normal attendance function, the user can also enter the Home page to operate after authenticating the permission. Normal User The User is the normal user. The user can only authenticate or take attendance on the initial page.

  • Page 67: Data Management

    Face Recognition Terminal User Manual 7.4 Data Management You can delete data, import data, and export data. 7.4.1 Delete Data Delete user data. On the Home page, tap Data → Delete Data → User Data . All user data added in the device will be deleted.

  • Page 68: Export Data

    Face Recognition Terminal User Manual 7.4.3 Export Data Steps 1. Plug a USB flash drive in the device. 2. On the Home page, tap Data → Export Data . 3. Tap Event Data, User Data, or Face Data. 4. Optional: Create a password for exporting. When you import those data to another device, you should enter the password.

  • Page 69: Authenticate Via Multiple Credential

    Face Recognition Terminal User Manual Note The card can be normal IC card, or encrypted card. QR Code Put the QR code in front of the device camera to authenticate via QR code. Note Authentication via QR code should be supported by the device. ●...

  • Page 70: Basic Settings

    Face Recognition Terminal User Manual 7.6 Basic Settings You can set the voice settings, time settings, sleeping (s), language, community No., building No., Unit No., and beauty. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and login the device home page.

  • Page 71: Set Biometric Parameters

    Face Recognition Terminal User Manual Set the device sleeping waiting time (minute). When you are on the initial page and if you set the sleeping time to 30 min, the device will sleep after 30 min without any operation. Note If you set the sleeping time to 0, the device will not enter sleeping mode.
  • Page 72 Face Recognition Terminal User Manual Parameter Description Note After disabling face anti-spoofing function, there will be spoofing recognition risks. Face Recognition Set the valid distance between the user and the camera when Distance authenticating. Face Recognition The time interval between two continuous face recognitions when Interval authenticating.
  • Page 73 Face Recognition Terminal User Manual Parameter Description Note After enabling ECO mode, the face will be recognized in weak light or no light environment. After disabling ECO mode, face recognition effect will decline in weak light or no light environment. ECO Threshold When enabling the ECO mode, you can set the ECO mode’s threshold.

  • Page 74: Set Access Control Parameters

    Face Recognition Terminal User Manual Parameter Description If the person do not wear the hard hat when authenticating, the device will pop up a prompt and the door will keep closed. None If the person do not wear a face mask when authenticating, the device will not prompt a notification.
  • Page 75 Face Recognition Terminal User Manual Figure 7-13 Access Control Parameters The available parameters descriptions are as follows: Table 7-2 Access Control Parameters Descriptions Parameter Description Terminal Auth. Mode (Terminal Select the face recognition terminal's authentication mode. You Authentication Mode) can also customize the authentication mode.

  • Page 76: Time And Attendance Status Settings

    Face Recognition Terminal User Manual Parameter Description Note Only the device with the fingerprint module supports the ● fingerprint related function. Biometric recognition products are not completely applicable ● to anti-spoofing environments. If you require a higher security level, use multiple authentication modes. If you adopt multiple authentication modes, you should ●...

  • Page 77: Disable Attendance Mode Via Device

    Face Recognition Terminal User Manual 7.9.1 Disable Attendance Mode via Device Disable the attendance mode and the system will not display the attendance status on the initial page. Tap T&A Status to enter the T&A Status page. Figure 7-14 Disable Attendance Mode Set the Attendance Mode as Disable.

  • Page 78: Set Auto Attendance Via Device

    Face Recognition Terminal User Manual Figure 7-15 Manual Attendance Mode 3. Enable the Attendance Status Required. 4. Enable a group of attendance status. Note The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required. The name will be displayed on the T &...
  • Page 79 Face Recognition Terminal User Manual Steps 1. Tap T&A Status to enter the T&A Status page. 2. Set the Attendance Mode as Auto. Figure 7-16 Auto Attendance Mode 3. Enable the Attendance Status function. 4. Enable a group of attendance status. Note The Attendance Property will not be changed.

  • Page 80: Set Manual And Auto Attendance Via Device

    Face Recognition Terminal User Manual Example If set the Break Out as Monday 11:00, and Break In as Monday 12:00, the valid user's authentication from Monday 11:00 to 12:00 will be marked as break. 7.9.4 Set Manual and Auto Attendance via Device Set the attendance mode as Manual and Auto, and the system will automatically change the attendance status according to the configured schedule.

  • Page 81: Preference Settings

    Face Recognition Terminal User Manual 2) Select Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, or Sunday. 3) Set the selected attendance status's start time of the day. 4) Tap OK. 5) Repeat step 1 to 4 according to your actual needs. Note The attendance status will be valid within the configured schedule.

  • Page 82: System Maintenance

    Face Recognition Terminal User Manual Note You can select call type from Call Room, Call Center, Call Specified Room No. and Call APP. Call Room When you tap the call button on the authentication page, you should dial a room No. to call.
  • Page 83 Face Recognition Terminal User Manual Hold the ? on the upper-right corner of the page and enter the password to view the version of the device. System Information You can view the device model, serial No., versions, address, production data, QR code, and open source code license.
  • Page 84 Face Recognition Terminal User Manual You can view the number of, user, face picture, card, and event. Device Upgrade Online Update If the device has been connected to Hik-Connect and network, when there is a new installation package in Hik-Connect, you can tap Device Upgrade → Online Update to upgrade the device system.

  • Page 85: Video Intercom

    Face Recognition Terminal User Manual You can view the device information. 7.12 Video Intercom After adding the device to the client software, you can call the device from the client software, call the main station from the device, call the client software from the device, or call the indoor station from the device.

  • Page 86: Call Device From Client Software

    Face Recognition Terminal User Manual 5. Set the main station's IP address and SIP address in the remote configuration page. Note For details about the operation, see the user manual of the main station. 6. Call the center. - If you have configured to call center in the Basic Settings , you can tap to call the center.

  • Page 87: Call Mobile Client From Device

    Face Recognition Terminal User Manual Note For details about adding device, see Add Device. 5. Link a user to an indoor station and set a room No. for the indoor station. 6. Call the room. - If you have configured a specified room No. in the Basic Settings , you can tap to call the room.

  • Page 88: Chapter 8 Quick Operation Via Web Browser

    Face Recognition Terminal User Manual Chapter 8 Quick Operation via Web Browser 8.1 Select Language You can select a language for the device system. Click in the top right of the web page to enter the Device Language Settings page. You can select a language for the device system from the drop-down list.

  • Page 89: Administrator Settings

    Face Recognition Terminal User Manual Picture Uploading and Storage Save Picture When Authenticating Save picture when authenticating automatically. Upload Picture When Authenticating Upload the pictures when authenticating to the platform automatically. Save Registered Picture The registered face picture will be saved to the system if you enable the function. Upload Picture After Linked Capture Upload the pictures captured by linked camera to the platform automatically.

  • Page 90: And System Network

    Face Recognition Terminal User Manual 8.5 No.and System Network Steps 1. Click in the top right of the web page to enter the wizard page. After previous settings, you can click Next to enter the No. and System Network settings page. 2.

  • Page 91: Chapter 9 Operation Via Web Browser

    Face Recognition Terminal User Manual Chapter 9 Operation via Web Browser 9.1 Login You can login via the web browser. Note Make sure the device is activated. For detailed information about activation, see Activation . Login via Web Browser Enter the device IP address in the address bar of the web browser and press Enter to enter the login page.
  • Page 92 Face Recognition Terminal User Manual Figure 9-1 Overview Page Function Descriptions: Real-Time Event You can view the event Employee ID, Name, Card No., Event Type, Time, and Operation. You can also click View More to enter the page of Event Search. You can select event types, enter the employee ID, the name, the card No., the start time, and the end time, and click Search.

  • Page 93: Person Management

    Face Recognition Terminal User Manual The door status is open/closed/remaining open/remaining closed. Controlled Status You can control the door to be opened, closed, remaining open or remaining closed according to your actual needs. Person Information You can view the added and not added information of person face, card and fingerprint. Network Status You can view the connected and registered status of wired network, wireless network, cloud service and ISUP.
  • Page 94 Face Recognition Terminal User Manual Figure 9-2 Add Person...
  • Page 95 Face Recognition Terminal User Manual Add Basic Information Click Person Management → Add to enter the Add Person page. Add the person's basic information, including the employee ID, the person's name, the gender, person type. If you select Visitor as the person type, you can set the visit times. Click Save to save the settings.

  • Page 96: Search Event

    Face Recognition Terminal User Manual Click to delete it. Click Save to save the settings. Authentication Settings Click Person Management → Add to enter the Add Person page. Set Authentication Type as Same as Device or Custom. Click Save to save the settings. 9.5 Search Event Click Event Search to enter the Search page.

  • Page 97: Change Administrator's Password

    Face Recognition Terminal User Manual By default, the device time should be synchronized manually. You can set the device time manually or check Sync. with Computer Time to synchronize the device time with the computer's time. Server Address Type/Server Address/NTP Port/Interval You can set the server address type, server address, NTP port, and interval.
  • Page 98 Face Recognition Terminal User Manual Set Basic Network Parameters Click Configuration → Network → Network Settings → TCP/IP . Figure 9-3 TCP/IP Settings Page Set the parameters and click Save to save the settings. NIC Type Select a NIC type from the drop-down list. By default, it is Self-Adaptive. DHCP If uncheck the function, you should set the IPv4 address, IPv4 subnet mask and IPv4 default gateway.
  • Page 99 Face Recognition Terminal User Manual Steps Note The function should be supported by the device. 1. Click Configuration → Network → Network Settings → Wi-Fi . Figure 9-4 Wi-Fi Settings Page 2. Check Wi-Fi. 3. Select a Wi-Fi - Click Connect of a Wi-Fi in the list and enter the Wi-Fi password. - Click Manual Add and enter a Wi-Fi's SSID, working mode, security mode, and password.
  • Page 100 Face Recognition Terminal User Manual Set the HTTPS for accessing the browser. Certificate is required when accessing. HTTP Listening The device can send alarm information to the event alarm IP address or domain name via HTTP protocol/HTTPS protocol. Edit the event alarm IP address or domain name, URL, port, and protocol.

  • Page 101: Set Video And Audio Parameters

    Face Recognition Terminal User Manual Note Scan the QR code before it loses efficacy. 7. Optional: Click More to set the network connection priority. 1) Enable WLAN or Wired Network according to your actual needs. 1) Hold and drag to adjust the access priority. 8.

  • Page 102: Set Image Parameters

    Face Recognition Terminal User Manual Figure 9-5 Video Settings Page Set the stream type, the video type, the resolution, the bitrate type, the Max. bitrate, and I Frame Interval. Click Save to save the settings after the configuration. Figure 9-6 Audio Settings Set the stream type, input volume, output volume and enable voice prompt according to your actual needs.

  • Page 103: Alarm Settings

    Face Recognition Terminal User Manual Image Adjustment Drag the block or enter the value to adjust the live video's brightness, contrast, saturation, and sharpness. Video Adjustment (Video Standard) Set the video frame rate when performing live view remotely. After changing the standard, you should reboot the device to take effect.

  • Page 104: Access Control Settings

    Face Recognition Terminal User Manual 9.6.9 Access Control Settings Set Authentication Parameters Click Configuration → Access Control → Authentication Settings . Note The functions vary according to different models. Refers to the actual device for details. Click Save to save the settings after the configuration. If select Terminal 1: Terminal/Terminal Type/Terminal Model Select terminal and get the terminal description.
  • Page 105 Face Recognition Terminal User Manual Sub Card Reader Position You can select sub card reader position as different or same side as the main card reader. Authentication Select an authentication mode according to your actual needs from the drop-down list. Recognition Interval You can set the interval between 2 continuous recognition of a same person during the authentication.
  • Page 106 Face Recognition Terminal User Manual Figure 9-7 Door Parameters Settings Page Click Save to save the settings after the configuration. Door Name You can create a name for the door. Open Duration Set the door unlocking duration. If the door is not opened for the set time, the door will be locked.
  • Page 107 Face Recognition Terminal User Manual The door contact can be enabled with appropriate delay after person with extended access needs swipes her/his card. Door Remain Open Duration with First Person Set the door open duration when first person is in. After the first person is authorized, it allows multiple persons access the door or other authentication actions.

  • Page 108: Set Video Intercom Parameters

    Face Recognition Terminal User Manual Set Wiegand Parameters You can set the Wiegand transmission direction. Steps Note Some device models do not support this function. Refer to the actual products when configuration. 1. Click Configuration → Access Control → Wiegand Settings . 2.
  • Page 109 Face Recognition Terminal User Manual Figure 9-8 Device No. Settings Device Type The device can be used as a door station or outer door station. Select a device type from the drop-down list. Note If you change the device type, you should reboot the device. Floor No.

  • Page 110: Press Button To Call

    Face Recognition Terminal User Manual Unit No. Set the device unit No. Note If you change the No., you should reboot the device. If set the device type as Outer Door Station, you can set outer door station No., and community Outer Door Station No.

  • Page 111: Card Settings

    Face Recognition Terminal User Manual 9.6.12 Card Settings Set Card Security Click Configuration → Card Settings → Card Type to enter the settings page. Set the parameters and click Save. Enable NFC Card Enable the function and you can present the NFC card to authenticate. In order to prevent the mobile phone from getting the data of the access control, you can disable NFC card to increase the security level of the data.

  • Page 112: Time And Attendance Settings

    Face Recognition Terminal User Manual 9.6.13 Time and Attendance Settings If you want to track and monitor when the persons start/stop work and monitor their working hours and late arrivals, early departures, time taken on breaks, and absenteeism, you can add the person to the shift group and assign a shift schedule (a rule for the attendance defining how the schedule repeats, the shift type, break settings, and the card swiping rule.) to the shift group to define the attendance parameters for the persons in the shift group.

  • Page 113: Set Privacy Parameters

    Face Recognition Terminal User Manual 2. Set the Attendance Mode as Auto. 3. Enable the Attendance Status function. 4. Enable a group of attendance status. Note The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required. 6.
  • Page 114 Face Recognition Terminal User Manual Go to Configuration → Security → Privacy Settings Event Storage Settings Select a method to delete the event. You can select from Delete Old Events Periodically, Delete Old Events by Specified Time, or Overwriting. Delete Old Events Periodically Drag the block or enter number to set the period for event deleting.

  • Page 115: Set Biometric Parameters

    Face Recognition Terminal User Manual All registered pictures in the device will be deleted. Clear Captured Pictures All captured pictures in the device will be deleted. 9.6.15 Set Biometric Parameters Set Basic Parameters Click Configuration → Smart → Smart . Note The functions vary according to different models.
  • Page 116 Face Recognition Terminal User Manual Face Anti-spoofing Enable or disable the live face detection function. If enabling the function, the device can recognize whether the person is a live one or not. Note Biometric recognition products are not 100% applicable to anti-spoofing environments. If you ●...
  • Page 117 Face Recognition Terminal User Manual After enabling the ECO mode, the device will use the IR camera to authenticate faces in the low light or dark environment. And you can set the ECO mode threshold, ECO mode (1:N), and ECO mode (1:1).

  • Page 118: Preference Settings

    Face Recognition Terminal User Manual Set the matching threshold when authenticating with face mask via 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. Face with Mask & Face (1:1 ECO) Set the matching value when authenticating with face mask via ECO mode 1:1 matching mode.
  • Page 119 Face Recognition Terminal User Manual Sleep Enable Sleep and the device will enter the sleep mode when no operation within the configured sleep time. Display Mode You can select display theme for device authentication. You can select Display Mode as Authentication, Simple or Advertisement.
  • Page 120 Face Recognition Terminal User Manual Figure 9-10 Customize Audio Content 2. Set the appellation. 3. Enable the function. 4. Set the time duration when authentication succeeded. 1) Click Add. 2) Set the time duration and the language. Note If authentication is succeeded in the configured time duration, the device will broadcast the configured content.

  • Page 121: Upgrade And Maintenance

    Face Recognition Terminal User Manual 3) Enter the audio content. 4) Optional: Repeat substep 1 to 3. 5) Optional: Click to delete the configured time duration. 6. Optional: Import custom prompt. 1) Select Custom Type. 2) Select the importing path, and click Import. 7.
  • Page 122 Face Recognition Terminal User Manual Note Do not power off during the upgrading. Restore Parameters Click Maintenance and Security → Maintenance → Backup and Reset . Restore All All parameters will be restored to the factory settings. You should activate the device before usage.

  • Page 123: Device Debugging

    Face Recognition Terminal User Manual The lock duration after enabling Lock Face for Anti-Spoofing Protection when anti-spoofing detection failed. Unlock You can click Unlock according to your needs. Version Information You can view the device information. 9.6.18 Device Debugging You can set device debugging parameters. Steps 1.

  • Page 124: Certificate Management

    Face Recognition Terminal User Manual Security Mode High security level for user information verification when logging in the client software. Compatible Mode The user information verification is compatible with the old client software version when logging in. Illegal Login Lock After enabling Illegal Login Lock, the device will be locked if it is logged in illegally.
  • Page 125 Face Recognition Terminal User Manual 2. In the Import Passwords and Import Communication Certificate areas, select certificate type and upload certificate. 3. Click Install. Install CA Certificate Before You Start Prepare a CA certificate in advance. Steps 1. Go to Configuration → System → Security → Certificate Management . 2.

  • Page 126: Chapter 10 Other Platforms To Configure

    You can also configure the device via iVMS-4200 Client Software or HikCentral Access Control. For details, see the platforms' user manual. iVMS-4200 Client Software Click/tap the link to view the client software's user manual. http://enpinfodata.hikvision.com/analysisQR/showQR/ca930247 HikCentral Access Control (HCAC) Click/tap the link to view the HCAC's user manual. http://enpinfodata.hikvision.com/analysisQR/showQR/f2f6cf42...

  • Page 127: Appendix A. Tips For Scanning Fingerprint

    Face Recognition Terminal User Manual Appendix A. Tips for Scanning Fingerprint Recommended Finger Forefinger, middle finger or the third finger. Correct Scanning The figure displayed below is the correct way to scan your finger: You should press your finger on the scanner horizontally. The center of your scanned finger should align with the scanner center.
  • Page 128 Face Recognition Terminal User Manual Environment The scanner should avoid direct sun light, high temperature, humid conditions and rain. When it is dry, the scanner may not recognize your fingerprint successfully. You can blow your finger and scan again. Others If your fingerprint is shallow, or it is hard to scan your fingerprint, we recommend you to use other authentication methods.

  • Page 129: Appendix B. Tips When Collecting/Comparing Face Picture

    Face Recognition Terminal User Manual Appendix B. Tips When Collecting/Comparing Face Picture The position when collecting or comparing face picture is as below: Positions (Recommended Distance: 0.5 m) Expression Keep your expression naturally when collecting or comparing face pictures, just like the ●...
  • Page 130 Face Recognition Terminal User Manual Size Make sure your face is in the middle of the collecting window.

  • Page 131: Appendix C. Tips For Installation Environment

    Face Recognition Terminal User Manual Appendix C. Tips for Installation Environment 1. Light Source Illumination Reference Value Candle: 10Lux Bulb: 100~850Lux Sunlight: More than 1200Lux 2. Install the device at least 2 meters away from the light, and at least 3 meters away from the window or door.

  • Page 132: Appendix D. Dimension

    Face Recognition Terminal User Manual Appendix D. Dimension Figure D-1 Dimension...
  • Page 133 Face Recognition Terminal User Manual Figure D-2 Dimension with Bracket...

  • Page 134: Appendix E. Function Differences

    Face Recognition Terminal User Manual Appendix E. Function Differences Model K1T680D K1T680D K1T680D K1T680D K1T680D K1T680D K1T680D K1T680D F-E1 Wi-Fi Support Support Support Support Support Support Support Support Support Support Support Support Support Support Support Support 3G/4G Support Support Support Support Support Support...
  • Page 135 UD21056B-E...

This manual is also suitable for:

Ds-k1t680dgDs-k1t680dfgDs-k1t680d-e1Ds-k1t680df-e1Ds-k1t680dfwPro series ... Show all

Table of Contents