Authenticate Via Multiple Credential - HIKVISION Ultra Series User Manual

Note
The card can be normal IC card, or encrypted card.
QR Code
Put the QR code in front of the device camera to authenticate via QR code.
Note
Authentication via QR code should be supported by the device.
●
The dimension of the recognized QR code picture should be larger than 6 cm × 6 cm.
●
Password
Enter the password to authenticate via password.
If authentication completed, a prompt "Authenticated" will pop up.

7.5.2 Authenticate via Multiple Credential

Before You Start
Set the user authentication type before authentication. For details, see Set Authentication Mode .
Steps
1. If the authentication mode is Card and Face, Password and Face, Card and Password, Card and
Face and Fingerprint, authenticate any credential according to the instructions on the live view
page.
Note
The card can be normal IC card, or encrypted card.
●
If the QR Code Scanning function is enabled, you can put the QR code in front of the device
●
camera to authenticate via QR code.
The dimension of the recognized QR code picture should be larger than 6 cm × 6 cm.
●
2. After the previous credential is authenticated, continue authenticate other credentials.
Note
For detailed information about scanning fingerprint, see Tips for Scanning Fingerprint.
●
For detailed information about authenticating face, see Tips When Collecting/Comparing Face
●
Picture.
If authentication succeeded, the prompt "Authenticated" will pop up.
Face Recognition Terminal User Manual
56