Wire Secure Door Control Unit - HIKVISION Ultra Series User Manual

Note
You should set the face recognition terminal's Wiegand direction as Input to connect to a
●
Wiegand card reader. If connects to an access controller, you should set the Wiegand direction as
Output to transmit authentication information to the access controller.
For details about Wiegand direction settings, see Set Wiegand Parameters .
●
Do not wire the device to the electric supply directly.
●

4.3 Wire Secure Door Control Unit

You can connect the terminal with the secure door control unit.
The wiring diagram is as follows.
Face Recognition Terminal User Manual
Figure 4-2 Device Wiring
11