Note
Make sure the device has added to the Hik-Connect account.
a. Download Hik-Connect app.
b. Go to More → Reset Device Password .
c. Scan the QR code on the device and a verification code will be popped up.
Note
Tap the QR code to get a larger picture.
d. Enter the verification code on the device page.
6. Create a new password and confirm it.
7. Tap OK.
7.2 Communication Settings
You can set the network parameters, the Wi-Fi parameter, the RS-485 parameters, the Wiegand
parameters, and enable 3G/4G on the communication settings page.
7.2.1 Set Wired Network Parameters
You can set the device wired network parameters, including the IP address, the subnet mask, the
gateway, and DNS parameters.
Steps
1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings
page.
2. On the Communication Settings page, tap Wired Network.
Face Recognition Terminal User Manual
38