Search Event; Configuration; View Device Information; Set Time - HIKVISION Ultra Series User Manual

Click to delete it.
Click Save to save the settings.
Authentication Settings
Click Person Management → Add to enter the Add Person page.
Set Authentication Type as Same as Device or Custom.
Click Save to save the settings.

9.5 Search Event

Click Event Search to enter the Search page.
Enter the search conditions, including the event type, the employee ID, the name, the card No., the
start time, and the end time, and click Search.
The results will be displayed on the right panel.

9.6 Configuration

9.6.1 View Device Information

View the device name, language, model, serial No., version, IO input, IO output, Lock, Local RS-485,
alarm input, alarm output, and device capacity, etc.
Click Configuration → System → System Settings → Basic Information to enter the configuration
page.
You can view device name, language, model, serial No., version, IO input, IO output, Lock, Local
RS-485,alarm input, alarm output, and device capacity, etc.

9.6.2 Set Time

Set the device's time, time zone, synchronization mode, server address, NTP port, and interval.
Click Configuration → System → System Settings → Time Settings .
Click Save to save the settings after the configuration.
Time Zone
Select the device located time zone from the drop-down list.
Time Sync.
NTP
You should set the NTP server's IP address, port No., and interval.
Manual
Face Recognition Terminal User Manual
83