Set Biometric Parameters - HIKVISION Ultra Series User Manual

Set the device sleeping waiting time (minute). When you are on the initial page and if you set
the sleeping time to 30 min, the device will sleep after 30 min without any operation.
Note
If you set the sleeping time to 0, the device will not enter sleeping mode.
Select Language
Select the language according to actual needs.
Community No.
Set the device installed community No.
Building No.
Set the device installed building No.
Unit No.
Set the device installed unit No.
Beauty
You can enable the beauty function and set the smooth and the whiten parameter. Tap + or - to
control the effect strength.
Note
By default, the function is disabled.

7.7 Set Biometric Parameters

You can customize the face parameters to improve the face recognition performance. The
configurable parameters includes application mode, face liveness level, face recognition distance,
face recognition interval, wide dynamic, face 1:N security level, face 1:1 security level, ECO
settings, face with mask detection, hard hat detection, and multiple faces authentication.
Long tap on the initial page for 3 s and login the home page. Tap System → Biometric .
Parameter
Face Liveness Level
Face Recognition Terminal User Manual
Table 7-1 Face Picture Parameters
After enabling face anti-​ s poofing function, you can set the matching
security level when performing live face authentication.
Description
58