And System Network - HIKVISION Ultra Series User Manual

8.5 No.and System Network
Steps
1. Click in the top right of the web page to enter the wizard page. After previous settings, you
can click Next to enter the No. and System Network settings page.
2. Set the device type.
If set the device type as Door Station or Access Control Device, you can set the floor No., door
station No., and click More to set Community No., Building No., and Unit No.
If set the device type as Outer Door Station, you can set outer door station No., and community
No.
3. Click Complete to save the settings after the configuration.
Device Type
The device can be used as a door station or outer door station. Select a device type from the
drop-down list.
Floor No.
Set the device installed floor No.
Door Station No.
Set the device installed floor No.
Note
The main door station No. is 0, and the sub door station No. ranges from 1 to 16.
Community No.
Set the device community No.
Building No.
Set the device building No.
Unit No.
Set the device unit No.
Face Recognition Terminal User Manual
77