Chapter 5 Activation; Activate Via Device - HIKVISION Ultra Series User Manual

You should activate the device before the first login. After powering on the device, the system will
switch to Device Activation page.
Activation via the device, SADP tool and the client software are supported.
The default values of the device are as follows:
The default IP address: 192.0.0.64
●
The default port No.: 8000
●
The default user name: admin
●

5.1 Activate via Device

If the device is not activated, you can activate the device after it is powered on.
On the Activate Device page, create a password and confirm the password. Tap Activate and the
device will activated.
Face Recognition Terminal User Manual

Chapter 5 Activation

17