Chapter 8 Quick Operation Via Web Browser; Select Language; Time Settings; Privacy Settings - HIKVISION Ultra Series User Manual

Chapter 8 Quick Operation via Web Browser

8.1 Select Language

You can select a language for the device system.
Click in the top right of the web page to enter the Device Language Settings page. You can
select a language for the device system from the drop-down list.
By default, the system language is English.
Note
After you change the system language, the device will reboot automatically.
Click Next to complete the settings.

8.2 Time Settings

Click in the top right of the web page to enter the wizard page. After setting device language,
you can click Next to enter the Time Settings page.
Time Zone
Select the device located time zone from the drop-down list.
Time Sync.
NTP
You should set the NTP server's IP address, port No., and interval.
Manual
By default, the device time should be synchronized manually. You can set the device time
manually or check Sync. with Computer Time to synchronize the device time with the
computer's time.
Server Address/NTP Port/Interval
You can set the server address, NTP port, and interval.
Click Next to save the settings and go to the next parameter. Or click Skip to skip time settings.

8.3 Privacy Settings

Set the picture uploading and storage parameters.
Click in the top right of the web page to enter the wizard page. After previous settings, you can
click Next to enter the Privacy Settings page.
Face Recognition Terminal User Manual
75