Preference Settings - HIKVISION Ultra Series User Manual

Set the matching threshold when authenticating with face mask via 1:N matching mode. The
larger the value, the smaller the false accept rate and the larger the false rejection rate.
Face with Mask & Face (1:1 ECO)
Set the matching value when authenticating with face mask via ECO mode 1:1 matching mode.
The larger the value, the smaller the false accept rate and the larger the false rejection rate.
Face with Mask 1:N Matching Threshold (ECO Mode)
Set the matching threshold when authenticating with face mask via ECO mode 1:N matching
mode. The larger the value, the smaller the false accept rate and the larger the false rejection
rate.
Enable Hard Hat Detection
After enabling the hard hat detection, you can set the strategy.
None
The function is disabled. The device will not detect whether a person is wearing a hard hat or
not.
Reminder of Wearing
If the person do not wear the hard hat when authenticating, the device will pop up a prompt
and the door will open.
Must Wear
If the person do not wear the hard hat when authenticating, the device will pop up a prompt
and the door will keep closed.
Set Recognition Area
Click Configuration → Smart → Area Configuration .
Drag the yellow frame in the live video or enter values for the left, right, top, and bottom margin to
adjust the recognition area. Only the face within the area can be recognized by the system.
Click Save to save the settings.

9.6.16 Preference Settings

Set the theme, notice publication, prompt schedule, custom prompt, and authentication result
text.
Set Preference
You can set the display theme and the sleep time for the device.
Set Theme
Click Configuration → Preference .
Face Recognition Terminal User Manual
105