Set Access Control Parameters - HIKVISION Ultra Series User Manual

Parameter

7.8 Set Access Control Parameters

You can set the access control permissions, including the functions of authentication mode, enable
NFC card, enable M1 card, door contact, open duration (s) and authentication interval (s).
On the Home page, tap ACS (Access Control Settings) to enter the Access Control Settings page.
Edit the access control parameters on this page.
Face Recognition Terminal User Manual
If the person do not wear the hard hat when authenticating, the
device will pop up a prompt and the door will keep closed.
None
If the person do not wear a face mask when authenticating, the
device will not prompt a notification.
Description
61