7.4.3 Export Data
Steps
1. Plug a USB flash drive in the device.
2. On the Home page, tap Data → Export Data .
3. Tap Event Data, User Data, or Face Data.
4. Optional: Create a password for exporting. When you import those data to another device, you
should enter the password.
Note
The supported USB flash drive format is DB.
●
The system supports the USB flash drive with the storage of 1G to 32G. Make sure the free
●
space of the USB flash drive is more than 512M.
The exported user data is a DB file, which cannot be edited.
●
7.5 Identity Authentication
After network configuration, system parameters configuration and user configuration, you can go
back to the initial page for identity authentication. The system will authenticate person according
to the configured authentication mode.
You can authenticate identity via 1:1 matching or 1:N matching.
1:N Matching
Compare the captured face picture with all face pictures stored in the device.
1: 1 Matching
Compare the captured face picture with the linked face picture.
7.5.1 Authenticate via Single Credential
Set the user authentication type before authentication. For details, see Set Authentication Mode .
Authenticate face, fingerprint, card or QR code.
Face
Face forward at the camera and start authentication via face.
Fingerprint
Place the enrolled fingerprint on the fingerprint module and start authentication via fingerprint.
Card
Present the card on the card presenting area and start authentication via card.
Face Recognition Terminal User Manual
55