Add Fingerprint - HIKVISION Ultra Series User Manual

After completely adding the face picture, a captured face picture will be displayed at the upper
right corner of the page.
7. Tap Save to save the face picture.
8. Optional: Tap Try Again and adjust your face position to add the face picture again.
9. Set the user role.
Administrator
The user is the administrator. Except for the normal attendance function, the user can also
enter the Home page to operate after authenticating the permission.
Normal User
The User is the normal user. The user can only authenticate or take attendance on the initial
page.
10. Tap to save the settings.

7.3.3 Add Fingerprint

Add a fingerprint for the user and the user can authenticate via the added fingerprint.
Steps
Note
The function should be supported by the device.
1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and enter
the device backend.
2. Tap User → + to enter the Add User page.
3. Tap the Employee ID. field and edit the employee ID.
Note
The employee ID should be less than 32 characters. And it can be a combination of lower
●
letters, upper letters, and numbers.
The employee ID should not start with 0 and should not be duplicated.
●
4. Tap the Name field and input the user name on the soft keyboard.
Note
Numbers, upper case letters, lower case letters, and special characters are allowed in the user
●
name.
The suggested user name should be within 32 characters.
●
5. Tap the Fingerprint field to enter the Add Fingerprint page.
6. Follow the instructions to add a fingerprint.
Face Recognition Terminal User Manual
50