HIKVISION DS-K1T343 Series User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Touch terminals
  5. DS-K1T343 Series
  6. User manual
HIKVISION DS-K1T343 Series User Manual

HIKVISION DS-K1T343 Series User Manual

Face recognition terminal
Hide thumbs Also See for DS-K1T343 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
DS-K1T343 Series Face Recognition Terminal
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-K1T343 Series and is the answer not in the manual?

Questions and answers

Related Manuals for HIKVISION DS-K1T343 Series

Summary of Contents for HIKVISION DS-K1T343 Series

  • Page 1 DS-K1T343 Series Face Recognition Terminal User Manual...

  • Page 2: About This Manual

    WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,...

  • Page 3: Data Protection

    During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method;...

  • Page 4: Symbol Conventions

    DS-K1T343 Series Face Recognition Terminal User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could Danger result in death or serious injury.

  • Page 5: Regulatory Information

    DS-K1T343 Series Face Recognition Terminal User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 6 DS-K1T343 Series Face Recognition Terminal User Manual under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.

  • Page 7: Safety Instruction

    DS-K1T343 Series Face Recognition Terminal User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Dangers and Cautions: Dangers: Neglecting any of the warnings may cause serious injury or death.
  • Page 8 DS-K1T343 Series Face Recognition Terminal User Manual Cautions: Do not drop the device or subject it to physical shock, and do not expose it to high ● electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage).

  • Page 9: Available Models

    DS-K1T343 Series Face Recognition Terminal User Manual Available Models Product Name Model Wireless Face Recognition Terminal DS-K1T343MX 13.56 MHz Card Presenting Frequency DS-K1T343MWX 13.56 MHz Card Presenting Frequency, Wi-Fi DS-K1T343MFX 13.56 MHz Card Presenting Frequency DS-K1T343MFWX 13.56 MHz Card Presenting...

  • Page 10: Table Of Contents

    DS-K1T343 Series Face Recognition Terminal User Manual Contents Chapter 1 Overview ........................1 1.1 Overview ..........................1 1.2 Features ..........................1 Chapter 2 Appearance ........................ 2 Chapter 3 Installation ......................... 4 3.1 Installation Environment ......................4 3.2 Install with Gang Box ......................4 3.3 Base Mounting ........................
  • Page 11 DS-K1T343 Series Face Recognition Terminal User Manual 6.6 Set Administrator ......................... 24 Chapter 7 Basic Operation ......................26 7.1 Login ............................ 26 7.1.1 Login by Administrator ....................26 7.1.2 Login by Activation Password ..................27 7.1.3 Forgot Password ......................28 7.2 Communication Settings ......................
  • Page 12 DS-K1T343 Series Face Recognition Terminal User Manual 7.5.2 Authenticate via Multiple Credential ................45 7.6 Local Time and Attendance ....................45 7.6.1 Attendance Process Description ................. 46 7.6.2 Department Management ..................46 7.6.3 Enable Local T&A ......................47 7.6.4 Shift Management ...................... 47 7.6.5 Shift Schedule ......................
  • Page 13 DS-K1T343 Series Face Recognition Terminal User Manual 8.4.4 User Management ...................... 72 8.4.5 Network Settings ......................72 8.4.6 User Management ...................... 77 8.4.7 Search Event ........................ 78 8.4.8 Access Control Settings ....................78 8.4.9 Video Intercom Settings ....................82 8.4.10 Audio Settings ......................84 8.4.11 Face Parameters Settings ..................
  • Page 14 DS-K1T343 Series Face Recognition Terminal User Manual 10.5 Quick Operation via Web Browser ..................98 10.5.1 Change Password ...................... 98 10.5.2 Select Language ......................98 10.5.3 Time Settings ......................98 10.5.4 Privacy Settings ......................99 10.5.5 Administrator Settings ....................99 10.5.6 No.
  • Page 15 DS-K1T343 Series Face Recognition Terminal User Manual 10.10.5 Manage Schedule ....................129 10.10.6 Manage Holiday via Web ..................130 10.10.7 View Attendance Report ..................130 10.11 System Configuration ..................... 131 10.11.1 View Device Information via PC Web ..............131 10.11.2 Set Time ........................ 131 10.11.3 Change Administrator's Password .................
  • Page 16 DS-K1T343 Series Face Recognition Terminal User Manual 10.13.4 Export Device Parameters via PC Web ..............153 10.13.5 Import Device Parameters via PC Web ..............153 10.13.6 Device Debugging ....................153 10.13.7 View Log via PC Web ..................... 156 10.13.8 Advanced Settings via PC Web ................156 10.13.9 Security Management ...................

  • Page 17: Chapter 1 Overview

    DS-K1T343 Series Face Recognition Terminal User Manual Chapter 1 Overview 1.1 Overview Face recognition terminal is a kind of access control device for face recognition, which is mainly applied in security access control systems, such as logistic centers, airports, university campuses, alarm centrals, dwellings, etc.

  • Page 18: Chapter 2 Appearance

    DS-K1T343 Series Face Recognition Terminal User Manual Chapter 2 Appearance The appearance of the device with fingerprint is as follows: Figure 2-1 Appearance（With Fingerprint) The appearance of the device without fingerprint is as follows: Figure 2-2 Appearance（Without Fingerprint)
  • Page 19 DS-K1T343 Series Face Recognition Terminal User Manual Table 2-1 Appearance Description Name Loudspeaker USB Interface Touch Screen IR Light Camera Camera IR Light Card Presenting Area Fingerprint Module Note Only devices that support the fingerprint function contain a fingerprint module.

  • Page 20: Chapter 3 Installation

    DS-K1T343 Series Face Recognition Terminal User Manual Chapter 3 Installation 3.1 Installation Environment Avoid backlight, direct sunlight, and indirect sunlight. ● For better recognition, there should be light source in or near the installation environment. ● The minimum bearing weight of the wall or other places should be 3 times heavier than the ●...
  • Page 21 DS-K1T343 Series Face Recognition Terminal User Manual Figure 3-1 Install Gang Box 2. Use 4 supplied screws (M4) to secure the mounting plate on the gang box.
  • Page 22 DS-K1T343 Series Face Recognition Terminal User Manual Figure 3-2 Install Mounting Plate 3. Route the cables through the cable hole of the mounting plate, and connect to the corresponding peripherals cables. 4. Buckle into the mounting plate after aligning the device with the mounting plate. Use 1 supplied...

  • Page 23: Base Mounting

    DS-K1T343 Series Face Recognition Terminal User Manual Figure 3-3 Secure Device 3.3 Base Mounting Steps 1. Route the cables through the cable hole of the bracket, and connect the terminals with peripherals cables. Place the bracket close to the back side of the device.
  • Page 24 DS-K1T343 Series Face Recognition Terminal User Manual Figure 3-5 Fasten Bracket 3. Buckle into the bracket to the end to complete the installation. Figure 3-6 Complete Installation...

  • Page 25: Chapter 4 Wiring

    DS-K1T343 Series Face Recognition Terminal User Manual Chapter 4 Wiring You can connect the RS-485 terminal with the RS-485 card reader, connect the NC/NO and COM terminal with the door lock, connect the SEN and GND terminal with the door contact, the BTN/GND terminal with the exit button, and connect the Wiegand terminal with the access controller.

  • Page 26: Wire Normal Device

    DS-K1T343 Series Face Recognition Terminal User Manual Group Function Color Name Description White Wiegand Wiring 1 Black Ground Group D Door Lock White/Purple Lock Wiring (NC) White/Yellow Common White/Red Lock Wiring (NO) Yellow/Green SENSOR Door Contact Black Ground Yellow/Grey BUTTON...

  • Page 27: Wire Secure Door Control Unit

    DS-K1T343 Series Face Recognition Terminal User Manual Figure 4-1 Device Wiring Note You should set the face recognition terminal's Wiegand direction as Input to connect to a ● Wiegand card reader. If connects to an access controller, you should set the Wiegand direction as Output to transmit authentication information to the access controller.

  • Page 28: Wire Fire Module

    DS-K1T343 Series Face Recognition Terminal User Manual Figure 4-2 Secure Door Control Unit Wiring Note The secure door control unit should connect to an external power supply separately. The suggested external power supply is 12V, 0.5A. 4.4 Wire Fire Module 4.4.1 Wiring Diagram of Door Open When Powering Off...
  • Page 29 DS-K1T343 Series Face Recognition Terminal User Manual Figure 4-3 Wire Device Figure 4-4 Wire Secure Door Control Unit Type 2 Note The fire system (NO and COM, normally open when powering off) is connected with the lock and the power supply in series. When an fire alarm is triggered, the door remains open. In normal...

  • Page 30: Wiring Diagram Of Door Locked When Powering Off

    DS-K1T343 Series Face Recognition Terminal User Manual Figure 4-5 Wiring Device Figure 4-6 Wiring Secure Door Control Unit 4.4.2 Wiring Diagram of Door Locked When Powering Off Lock Type: Cathode Lock, Electric Lock, and Electric Bolt (NC) Security Type: Door Locked When Powering Off...
  • Page 31 DS-K1T343 Series Face Recognition Terminal User Manual Note The Uninterpretable Power Supply (UPS) is required. ● The fire system (NC and COM, normally closed when powering off) is connected with the lock ● and the power supply in series. When an fire alarm is triggered, the door remains open. In normal times, NC and COM are open.

  • Page 32: Chapter 5 Activation

    DS-K1T343 Series Face Recognition Terminal User Manual Chapter 5 Activation You should activate the device before the first login. After powering on the device, the system will switch to Device Activation page. Activation via the device, SADP tool and the client software are supported.

  • Page 33: Activate Via Web Browser

    4 or more continuously increasing or decreasing digits, or 4 or more consecutively repeated characters. Password cannot contain words such as hik, hkws, and hikvision (case insensitive). ● After activation, you should select a language according to your actual needs.

  • Page 34: Activate Via Sadp

    ● insensitive), 4 or more continuously increasing or decreasing digits, or 4 or more consecutively repeated characters. Password cannot contain words such as hik, hkws, and hikvision (case insensitive). ● 3. Click Activate. 4. Edit the device IP address. You can edit the IP address via the SADP tool, the device, and the client software.

  • Page 35: Activate Device Via Ivms-4200 Client Software

    DS-K1T343 Series Face Recognition Terminal User Manual Note Characters containing admin and nimda are not supported to be set as activation password. 4. Click Activate to start activation. Status of the device becomes Active after successful activation. 5. Modify IP address of the device.
  • Page 36 DS-K1T343 Series Face Recognition Terminal User Manual 5. Click Activate to open the Activation dialog. 6. Create a password in the password field, and confirm the password. Caution The password strength of the device can be automatically checked. We highly recommend you...

  • Page 37: Chapter 6 Quick Operation

    DS-K1T343 Series Face Recognition Terminal User Manual Chapter 6 Quick Operation 6.1 Select Language You can select a language for the device system. After the device activation, you can select a language for the device system. Figure 6-1 Select System Language By default, the system language is English.

  • Page 38: Set Network Parameters

    DS-K1T343 Series Face Recognition Terminal User Manual Change via Security Questions If you need to change password via security questions, you can tap Change to Security Questions on the right corner. Select the security questions and enter the answers. Click Next.

  • Page 39: Privacy Settings

    DS-K1T343 Series Face Recognition Terminal User Manual Figure 6-2 Access to Hik-Connect 2. Tap Next. 3. Optional: Tap Skip to skip the step. 4. Optional: Tap Previous to go to the previous page. Note If you tap Previous to return to the Wi-Fi configuration page, you need to tap the connected Wi- Fi or connect another Wi-Fi to enter the platform page again.

  • Page 40: Set Administrator

    DS-K1T343 Series Face Recognition Terminal User Manual Save Pic. After Linked Capture (Save Pictures After Linked Capture) If you enable this function, you can save the picture captured by linked camera to the device. Upload Captured Pic. During Call Upload the pictures captured during call to the platform automatically.
  • Page 41 DS-K1T343 Series Face Recognition Terminal User Manual : Enter the card No. or present card on the card presenting area. Click OK. 4. Click OK. You will enter the authentication page. Status Icon Description Device is armed/not armed. Hik-Connect is enabled/disabled.

  • Page 42: Chapter 7 Basic Operation

    DS-K1T343 Series Face Recognition Terminal User Manual Chapter 7 Basic Operation 7.1 Login Login the device to set the device basic parameters. 7.1.1 Login by Administrator If you have added an administrator for the device, only the administrator can login the device for device operation.

  • Page 43: Login By Activation Password

    DS-K1T343 Series Face Recognition Terminal User Manual Figure 7-2 Home Page Note The device will be locked for 30 minutes after 5 failed fingerprint or card attempts. 3. Optional: Tap and you can enter the device activation password for login.

  • Page 44: Forgot Password

    DS-K1T343 Series Face Recognition Terminal User Manual Figure 7-3 Home Page 7.1.3 Forgot Password If you forget the password during authentication, you can change the password. Steps 1. Hold the initial page for 3 s and slide to the left/right by following the gesture and log in the page.

  • Page 45: Communication Settings

    DS-K1T343 Series Face Recognition Terminal User Manual c. Scan the QR code on the device and a verification code will be popped up. Note Tap the QR code to get a larger picture. d. Enter the verification code on the device page.

  • Page 46: Set Wi-Fi Parameters

    DS-K1T343 Series Face Recognition Terminal User Manual Figure 7-4 Wired Network Settings 3. Set IP Address, Subnet Mask, and Gateway. - Enable DHCP, and the system will assign IP address, subnet mask, and gateway automatically. - Disable DHCP, and you should set the IP address, subnet mask, and gateway manually.

  • Page 47: Set Rs-485 Parameters

    DS-K1T343 Series Face Recognition Terminal User Manual 2. On the Communication Settings page, tap. Figure 7-5 Wi-Fi Settings 3. Enable the Wi-Fi function. 4. Configure the Wi-Fi parameters. - Select a Wi-Fi from the list, and enter the Wi-Fi's password. Tap OK.

  • Page 48: Set Wiegand Parameters

    DS-K1T343 Series Face Recognition Terminal User Manual Steps 1. Tap System Settings → Comm. (Communication Settings) on the Home page to enter the Communication Settings page. 2. On the Communication Settings page, tap RS-485 to enter the RS-485 tab. Figure 7-6 Set RS-485 Parameters 3.

  • Page 49: Set Isup Parameters

    DS-K1T343 Series Face Recognition Terminal User Manual Figure 7-7 Wiegand Settings 3. Enable the Wiegand function. 4. Select a Wiegand mode. Output: A face recognition terminal can connect an external access controller. And the two ● devices will transmit the card No. via Wiegand 26 or Wiegand 34.
  • Page 50 DS-K1T343 Series Face Recognition Terminal User Manual Figure 7-8 ISUP Settings 2. Enable the ISUP function and set the ISUP server parameters. ISUP Version Set the ISUP version according to your actual needs. Central Group Enable central group and the data will be uploaded to the center group.

  • Page 51: Platform Access

    DS-K1T343 Series Face Recognition Terminal User Manual Enable ISUP function and the data will be uploaded via EHome protocol. Address Type Select an address type according to your actual needs. IP Address Set the ISUP server's IP address. Port No.

  • Page 52: Snmp Settings

    DS-K1T343 Series Face Recognition Terminal User Manual 7.2.7 SNMP Settings You can set SNMP parameters. Steps 1. Tap System Settings → Comm. (Communication Settings) on the Home page to enter the Communication Settings page. 2. On the Communication Settings page, tap SNMP.

  • Page 53: Add Face Picture

    DS-K1T343 Series Face Recognition Terminal User Manual Note The employee ID should be less than 32 characters. And it can be a combination of lower ● letters, upper letters, and numbers. The employee ID should not be duplicated. ● 4. Tap the Name field and input the user name on the soft keyboard and select department.
  • Page 54 DS-K1T343 Series Face Recognition Terminal User Manual 1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and log in the backend. 2. Tap User → + to enter the Add User page.

  • Page 55: Add Fingerprint

    DS-K1T343 Series Face Recognition Terminal User Manual After completely adding the face picture, a captured face picture will be displayed at the upper right corner of the page. 7. Tap Save to save the face picture. 8. Optional: Tap Try Again and adjust your face position to add the face picture again.

  • Page 56: Add Card

    DS-K1T343 Series Face Recognition Terminal User Manual Note The same fingerprint cannot be repeatedly added. ● Up to 10 fingerprints can be added for one user. ● You can also use the client software or the fingerprint recorder to record fingerprints.

  • Page 57: Add Pin

    DS-K1T343 Series Face Recognition Terminal User Manual - Enter the card No. manually. - Present the card over the card presenting area to get the card No. Note The card No. cannot be empty. ● Up to 20 characters are allowed in the card No.

  • Page 58: Set Authentication Mode

    DS-K1T343 Series Face Recognition Terminal User Manual Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user ● name. The suggested user name should be within 32 characters. ● 5. Tap the PIN code and create a PIN for the user.

  • Page 59: Data Management

    DS-K1T343 Series Face Recognition Terminal User Manual Search User On the User Management page, Tap the search area to enter the Search User page. Tap Card on the left of the page and select a search type from the drop-down list. Enter the employee ID, card No., or the user name for search.

  • Page 60: Export Data

    DS-K1T343 Series Face Recognition Terminal User Manual The imported pictures should be saved in the folder (named enroll_pic) of the root directory ● and the picture's name should be follow the rule below: Card No._Name_Department_Employee ID_Gender.jpg If the folder enroll_pic cannot save all imported pictures, you can create another folders, ●...

  • Page 61: Authenticate Via Multiple Credential

    DS-K1T343 Series Face Recognition Terminal User Manual Face forward at the camera and start authentication via face. Fingerprint Place the enrolled fingerprint on the fingerprint module and start authentication via fingerprint. Card Present the card on the card presenting area and start authentication via card.

  • Page 62: Attendance Process Description

    DS-K1T343 Series Face Recognition Terminal User Manual 7.6.1 Attendance Process Description Figure 7-10 Attendance Process Description 7.6.2 Department Management You can add, edit and delete the department. Tap Department on the Home page to enter the settings page. Add Department Tap +, enter the department name, and tap OK.

  • Page 63: Enable Local T&A

    DS-K1T343 Series Face Recognition Terminal User Manual Note The department name supports uppercase English, lowercase English, numbers and symbols. ● Up to 32 characters can be entered in department name. ● There are 7 departments in the department management by default.
  • Page 64 DS-K1T343 Series Face Recognition Terminal User Manual Figure 7-12 Attendance Rule Set the attendance rule, including Mark as Later if Checks in Late For and Mark as Early Leave if Checks out Early For. After entering the duration, tap OK to save the settings.
  • Page 65 DS-K1T343 Series Face Recognition Terminal User Manual Note The unit is min. ● The available time is from 0 to 1440 min. ● Set Normal Shift Edit or add the shift attendance information, including the shift name, the shift period, and the overtime shift period.

  • Page 66: Shift Schedule

    DS-K1T343 Series Face Recognition Terminal User Manual Note If the attendance rules conflict with the normal shift period, the device will prompt "Incorrect ● Time Duration". Delete all configured time durations and reset after exiting. The shift name supports numbers, uppercase letters, lowercase letters, Chinese characters ●...

  • Page 67: Manage Holiday (Add/Edit/Delete)

    DS-K1T343 Series Face Recognition Terminal User Manual Before You Start Edit department. For details, see Department Management . ● Set shift. For details, see Set Normal Shift and Set Flexible Shift . ● Steps 1. Tap Local T&A → T&A → Schedule to enter the Shift Schedule by Department page.

  • Page 68: Platform Attendance

    DS-K1T343 Series Face Recognition Terminal User Manual Add Holiday Tap Local T&A → T&A → Holiday Management , and tap + Add Holiday to enter the Add Holiday page. Enter Holiday Name and set Holiday Duration, and tap in the upper right of the Add Holiday page to save the settings.

  • Page 69: Set Manual Attendance Via Device

    DS-K1T343 Series Face Recognition Terminal User Manual Figure 7-15 Disable Attendance Mode Set the Attendance Mode as Disable. You will not view or configure the attendance status on the initial page. And the system will follow the attendance rule that configured on the platform.

  • Page 70: Set Auto Attendance Via Device

    DS-K1T343 Series Face Recognition Terminal User Manual Figure 7-16 Manual Attendance Mode 3. Enable the Attendance Status Required. 4. Enable a group of attendance status. Note The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required.
  • Page 71 DS-K1T343 Series Face Recognition Terminal User Manual Steps 1. Tap Platform Attendance to enter the T&A Status page. 2. Set the Attendance Mode as Auto. Figure 7-17 Auto Attendance Mode 3. Enable the Attendance Status function. 4. Enable a group of attendance status.

  • Page 72: Set Manual And Auto Attendance Via Device

    DS-K1T343 Series Face Recognition Terminal User Manual Example If set the Break Out as Monday 11:00, and Break In as Monday 12:00, the valid user's authentication from Monday 11:00 to 12:00 will be marked as break. 7.7.4 Set Manual and Auto Attendance via Device Set the attendance mode as Manual and Auto, and the system will automatically change the attendance status according to the configured schedule.

  • Page 73: Attendance Report

    DS-K1T343 Series Face Recognition Terminal User Manual 1) Tap Attendance Schedule. 2) Select Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, or Sunday. 3) Set the selected attendance status's start time of the day. 4) Tap OK. 5) Repeat step 1 to 4 according to your actual needs.
  • Page 74 DS-K1T343 Series Face Recognition Terminal User Manual Set the device sleeping waiting time (minute). When you are on the initial page and if you set the sleeping time to 30 min, the device will sleep after 30 min without any operation.

  • Page 75: Set Biometric Parameters

    DS-K1T343 Series Face Recognition Terminal User Manual Set the video frame rate when performing live view remotely. After changing the standard, you should reboot the device to take effect. PAL(50HZ) 25 frames per second. Suitable for mainland China, Hong Kong (China), the Middle East countries, Europe countries, etc.
  • Page 76 DS-K1T343 Series Face Recognition Terminal User Manual Figure 7-19 Biometric Parameters Page Table 7-1 Face Picture Parameters Parameter Description Face Liveness Level After enabling face anti-​ s poofing function, you can set the matching security level when performing live face authentication.
  • Page 77 DS-K1T343 Series Face Recognition Terminal User Manual Parameter Description Note You can input the number from 1 to 10. Face 1:N Security Level Set the matching threshold when authenticating via 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate.

  • Page 78: Preference Settings

    DS-K1T343 Series Face Recognition Terminal User Manual Parameter Description Set the matching value when authenticating with face mask via ECO mode 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate.
  • Page 79 DS-K1T343 Series Face Recognition Terminal User Manual Figure 7-20 Preference Settings Shortcut Key Choose the shortcut key that displayed on the authentication page, including the password entering function, QR code function, the call function, and call type. Note You can select call type from Call Room, Call Center, Call Specified Room No. and Call APP.

  • Page 80: Change Device Password

    DS-K1T343 Series Face Recognition Terminal User Manual Call APP When you tap the call button on the authentication page, you will call the mobile client where the device is added. Call Indoor Station No. After enabling, the Indoor Station No. will be displayed on the authentication page.

  • Page 81: Authentication Settings

    DS-K1T343 Series Face Recognition Terminal User Manual Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.
  • Page 82 DS-K1T343 Series Face Recognition Terminal User Manual Table 7-2 Access Control Parameters Descriptions Parameter Description Terminal Auth. Mode (Terminal Select the face recognition terminal's authentication mode. You Authentication Mode) can also customize the authentication mode. Note Only the device with the fingerprint module supports the ●...

  • Page 83: System Maintenance

    DS-K1T343 Series Face Recognition Terminal User Manual Parameter Description The PIN is set on the device or Web. You cannot set the PIN on other platform. 7.14 System Maintenance You can view the device system information and capacity. You can also upgrade device, view the device user manual, restore the system to factory settings, default settings, and reboot the system.
  • Page 84 DS-K1T343 Series Face Recognition Terminal User Manual Note The page may vary according to different device models. Refers to the actual page for details. Long tap , and enter admin password to view device version information. Face Parameter Custom Anti-Spoofing Detection...
  • Page 85 DS-K1T343 Series Face Recognition Terminal User Manual Restore to Factory Settings All parameters will be restored to the factory settings. The system will reboot to take effect. Restore to Default Settings All parameters, except for the communication settings, remotely imported user information, will be restored to the default settings.

  • Page 86: Chapter 8 Configure The Device Via The Mobile Web

    DS-K1T343 Series Face Recognition Terminal User Manual Chapter 8 Configure the Device via the Mobile Web 8.1 Login You can login via mobile browser. Note Parts of the model supports Wi-Fi settings. ● Make sure the device is activated. ●...

  • Page 87: Configuration

    Answer the security questions. E-mail Verification 1. Export the QR code and send it to pw_recovery@hikvision.com as attachment. 2. You will receive a verification code within 5 minutes in your reserved email. 3. Enter the verification code into the verification code field to verify your identification.

  • Page 88: Set Dst

    DS-K1T343 Series Face Recognition Terminal User Manual 8.4.3 Set DST Steps 1. Tap → System Settings → Time Settings , to enter the settings page. Figure 8-1 DST 2. Tap Enable DST. 3. Set the start time, end time, and DST bias.

  • Page 89: Wired Network

    DS-K1T343 Series Face Recognition Terminal User Manual Wired Network Set wired network. → Communication Settings → Wired Network to enter the configuration page. DHCP If you disable the function, you should set the IPv4 address, IPv4 subnet mask, IPv4 default gateway, Mac address, and MTU, Mac address, MTU.
  • Page 90 DS-K1T343 Series Face Recognition Terminal User Manual Figure 8-2 Wi-Fi...

  • Page 91: Platform Access

    DS-K1T343 Series Face Recognition Terminal User Manual 3. Add Wi-Fi. 1) Tap Add Wi-Fi. 2) Enter Wi-Fi Name and Wi-Fi Password, and select Encryption Type. 3) Tap Save. 4. Select the Wi-Fi name, and tap Connect. 5. Enter the password and tap Save.
  • Page 92 DS-K1T343 Series Face Recognition Terminal User Manual 7. Tap Save to enable the settings. Set ISUP Parameters Set the ISUP parameters for accessing device via ISUP protocol. Steps Note The function should be supported by the device. 1. Tap → Device Access → ISUP to enter the settings page.

  • Page 93: User Management

    DS-K1T343 Series Face Recognition Terminal User Manual 6. Tap Save. Note The penetration service will auto disabled after 48 h. 8.4.6 User Management You can add, edit, delete, and search users via mobile Web browser. Steps 1. Tap → Person Management to enter the settings page.

  • Page 94: Search Event

    DS-K1T343 Series Face Recognition Terminal User Manual 3. Tap the user that needs to be edited in the user list to edit the information. 4. Tap the user that needs to be deleted in the user list, and tap to delete the user.
  • Page 95 DS-K1T343 Series Face Recognition Terminal User Manual Alarm of Max. Failed Attempts Enable to report alarm when the card reading attempts reach the set value. Main Interface Mode You can set the Main Interface Mode as Authentication Mode or Simple.

  • Page 96: Terminal Parameters

    DS-K1T343 Series Face Recognition Terminal User Manual The door can open by inputting the duress code when there is duress. At the same time, the client can report the duress event. Super Password The specific person can open the door by inputting the super password.
  • Page 97 DS-K1T343 Series Face Recognition Terminal User Manual Enable the function and set the encryption sector. By default, Sector 13 is encrypted. It is recommended to encrypt sector 13. Enable EM Card Enable EM card and authenticating by presenting EM card is available.

  • Page 98: Video Intercom Settings

    DS-K1T343 Series Face Recognition Terminal User Manual The baud rate when the devices are communicating via the RS-485 protocol. Data Bit The data bit when the devices are communicating via the RS-485 protocol. Stop Bit The stop bit when the devices are communicating via the RS-485 protocol.
  • Page 99 DS-K1T343 Series Face Recognition Terminal User Manual Note If you change the No., you should reboot the device. ● The main door station No. is 0, and the sub door station No. ranges from 1 to 16. ● If set the device type as Outer Door Station, you can set outer door station No., and community Outer Door Station No.

  • Page 100: Audio Settings

    DS-K1T343 Series Face Recognition Terminal User Manual Note The Max. call duration range is 90 s to 120 s. Press Button to Call Steps 1. Tap → Intercom → Press Button to Call . 2. Tap Call or Call Center as your needs.

  • Page 101: Fingerprint Parameters

    DS-K1T343 Series Face Recognition Terminal User Manual 1:N Matching Threshold Set the matching threshold when authenticating via 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. The maximum value is 100.

  • Page 102: Set Time And Attendance Via Mobile Web Browser

    DS-K1T343 Series Face Recognition Terminal User Manual Tap Save to save the settings. 8.4.12 Set Time and Attendance via Mobile Web Browser You can set time and attendance by managing department, user, shift, holiday, and shift schedule. You can add, edit, and delete attendance department, user, shift, holiday, and shift schedule.
  • Page 103 DS-K1T343 Series Face Recognition Terminal User Manual Mark as Early Leave if Checks out Early For Set the Mark as Early Leave if Checks out Early For time. For example, set the off work time as 17:30 and set the parameter as 10 min, the earliest check out time will be 17:20. Checking out at or earlier than 17:19 will be marked as invalid.
  • Page 104 DS-K1T343 Series Face Recognition Terminal User Manual Manage Flexible Shift via Mobile Web Browser You can edit and add shift attendance information, including shift name and work duration. Steps 1. Set attendance rules. 1) Tap → Time and Attendance → Shift Management .
  • Page 105 DS-K1T343 Series Face Recognition Terminal User Manual Note If you select Quick Schedule, you need to set Day of Week, On-duty Time and Off-duty Time. ● If you select Advanced Schedule, you need to set Day of Week, Shift and choose to enable ●...

  • Page 106: Set Privacy Parameters

    DS-K1T343 Series Face Recognition Terminal User Manual View Attendance Statistics You can view Attendance Statistics by day or month. You can view attendance statistics by the following ways. 1. Tap Attendance Statistics. 2. Tap → Attendance Statistics . You can tap Day or Month to view attendance statistics.

  • Page 107: Password Mode

    DS-K1T343 Series Face Recognition Terminal User Manual 8.4.14 Password Mode Before configuring passwords, it is necessary to clarify whether the password is a device-set personal PIN or a platform-applied personal PIN. If it is a device-set personal PIN, it can be created or edited on the device or on the web, and cannot be set on other platforms;...

  • Page 108: View Online Document

    DS-K1T343 Series Face Recognition Terminal User Manual All parameters will be restored to the factory settings. You should activate the device before usage. 8.4.16 View Online Document → View Online Document . Tap View Online Document, you can scan the QR code with your mobile phone for details.

  • Page 109: Chapter 9 Quick Operation Via Web Browser

    DS-K1T343 Series Face Recognition Terminal User Manual Chapter 9 Quick Operation via Web Browser 9.1 Change Password You can change the device password. Click on the top right of the web page to enter the Change Password page. You can set security questions from the drop-down list and fill in the answers.

  • Page 110: Privacy Settings

    DS-K1T343 Series Face Recognition Terminal User Manual Click Next to save the settings and go to the next parameter. Or click Skip to skip time settings. 9.4 Privacy Settings Set the picture uploading and storage parameters. Click in the top right of the web page to enter the wizard page.

  • Page 111: And System Network

    DS-K1T343 Series Face Recognition Terminal User Manual Note Up to 10 fingerprints are allowed. 9.6 No. and System Network Steps 1. Click in the top right of the web page to enter the wizard page. After previous settings, you can click Next to enter the No. and Network System Network settings page.
  • Page 112 DS-K1T343 Series Face Recognition Terminal User Manual Registration Password Set the registration password of the main station for communication. Set the registration password of the main station for communication. Main Station IP Enter the main station’s IP address that used for communication.

  • Page 113: Chapter 10 Operation Via Web Browser

    Answer the security questions. E-mail Verification 1. Export the QR code and send it to pw_recovery@hikvision.com as attachment. 2. You will receive a verification code within 5 minutes in your reserved email. 3. Enter the verification code into the verification code field to verify your identification.

  • Page 114: View Online Help Document

    DS-K1T343 Series Face Recognition Terminal User Manual Click → Open Source Software Statement on the upper-right corner to view the licenses. 10.3.2 View Online Help Document You can view the help document for Web configuration. Click → Online Document on the upper right of the Web page to view the document.

  • Page 115: Privacy Settings

    DS-K1T343 Series Face Recognition Terminal User Manual Time Sync. You should set the NTP server's IP address, port No., and interval. Manual By default, the device time should be synchronized manually. You can set the device time manually or check Sync. with Computer Time to synchronize the device time with the computer's time.

  • Page 116: And System Network

    DS-K1T343 Series Face Recognition Terminal User Manual Note You should select at least one credential. 1) Click Add Face to upload a face picture from local storage. Note The uploaded picture should be within 200 K, in JPG、JPEG、PNG format. 2) Click Add Card to enter the Card No. and select the property of the card.

  • Page 117: Person Management

    DS-K1T343 Series Face Recognition Terminal User Manual Door Station No. Set the device installed door station No. Note The main door station No. is 0, and the sub door station No. ranges from 1 to 16. Outer Door Station No.
  • Page 118 DS-K1T343 Series Face Recognition Terminal User Manual Set Permission Time Click Person Management → Add to enter the Add Person page. Enable Long-Term Effective User, or set Long-Term Effective User, and the person can only has the permission within the configured time period according to your actual needs.

  • Page 119: Overview

    DS-K1T343 Series Face Recognition Terminal User Manual Add PIN Before configuring PIN, it is necessary to clarify whether the PIN is a device-set personal PIN or a platform-applied personal PIN. If it is a device-set personal PIN, it can be created or edited on the device or on the web, and cannot be set on other platforms;...
  • Page 120 DS-K1T343 Series Face Recognition Terminal User Manual Note If you adjust the volume when starting two-way audio, you may hear a repeated sounds. You can capture image when starting live view. The door status is open/closed/remaining open/remaining closed. You can record when starting live view.

  • Page 121: Access Control Application

    DS-K1T343 Series Face Recognition Terminal User Manual Note Only device installed fingerprint module can display the fingerprint capacity. 10.8 Access Control Application 10.8.1 Anti-Passback Settings The anti-passback function between devices requires personnel to authenticate sequentially according to the configured route. Only sub device supports this function and only one-way passing with authentication is supported.

  • Page 122: Access Control Management

    DS-K1T343 Series Face Recognition Terminal User Manual 10.9 Access Control Management 10.9.1 Search Event Click Event Search to enter the Search page. Enter the search conditions, including the event type, the employee ID, the name, the card No., the start time, and the end time, and click Search.
  • Page 123 DS-K1T343 Series Face Recognition Terminal User Manual Set the open duration, that is the action time after the door is unlocked. If the door is not opened within the set time, the door will automatically lock. Configurable time: 1 to 255 seconds.
  • Page 124 DS-K1T343 Series Face Recognition Terminal User Manual Set Door Lock Powering Off Status via PC Web You can set the door lock status when the door lock is powering off. Click Access Control → Parameter Settings → Door Parameters to enter the settings page.

  • Page 125: Authentication Settings

    DS-K1T343 Series Face Recognition Terminal User Manual Click Save. Note Duress code and super password can’t be duplicated, usually consisting of 4 to 8 digits. 10.9.3 Authentication Settings Select Main or Sub Card Reader via PC Web Set the terminal for person authentication.
  • Page 126 DS-K1T343 Series Face Recognition Terminal User Manual You can configure the duration for each certification. Note The password authenticating timeout is 20 s by default, which is not limited by above settings. Control Initial Authentication Type If enabled, all selected types can be used for first-time authentication.
  • Page 127 DS-K1T343 Series Face Recognition Terminal User Manual Set Authentication Interval via PC Web You can set the authentication interval of the same person when authenticating. The same person can only authenticate once in the configured interval. A second authentication will be failed. If other person authenticate in the configured interval, the person can authenticate again.

  • Page 128: Authentication Linkage Settings

    DS-K1T343 Series Face Recognition Terminal User Manual When Sub Card Reader is selected as the Terminal, you can select the position of sub card reader as Different Side from Main Card ReaderorSame Side as Main Card Reader. ClickSave. Set Communication with Controller Every via PC Web You can set communication with controller every of sub card reader.

  • Page 129: Set Authentication Plan

    DS-K1T343 Series Face Recognition Terminal User Manual Link to Call If Authentication Failed After enabling, if authentication failed attempts reached the set number, it will automatically call Button Settings's calling target to open door remotely. 3. Click Save. 10.9.5 Set Authentication Plan You can set authentication plan.
  • Page 130 DS-K1T343 Series Face Recognition Terminal User Manual Click Access Control → Parameter Settings → Smart to enter the settings page. Select the anti-spoofing detection level and click Save. You can choose from general, advanced and professional. The higher the level, the lower the fake recognition rate and the higher the rejection rate.
  • Page 131 DS-K1T343 Series Face Recognition Terminal User Manual Set Face Picture Quality Grade for Applying , the grade for face authentication needs to be higher than the threshold to be successful. Click Save. Set 1:1 Face Grade Threshold via PC Web Set 1:1 face grade threshold.
  • Page 132 DS-K1T343 Series Face Recognition Terminal User Manual Set Fingerprint Parameters via PC Web You can set the fingerprint parameters of the device. Click Access Control → Parameter Settings → Smart to enter the settings page. Select Fingerprint Security Level. The higher the level, the lower the fake recognition rate and the higher the rejection rate.

  • Page 133: Card Settings

    DS-K1T343 Series Face Recognition Terminal User Manual Click Access Control → Parameter Settings → Smart to enter the settings page. After enabling the face with mask detection, you can set Face without Mask Strategy, Face with Mask&Face (1:1), Face with Mask 1:N Match Threshold (ECO), Face with Mask 1:1 Match Threshold and Face with Mask 1:N Match Threshold (ECO).
  • Page 134 DS-K1T343 Series Face Recognition Terminal User Manual Click to Enable NFC Card and click Save. After enabling, the device can read NFC card. If the data of access control devices is obtained by mobile devices, the situation of unauthenticated access may occur.

  • Page 135: Set Remote Verification

    DS-K1T343 Series Face Recognition Terminal User Manual Click Save. Set DESFire Card You can enable DESFire card and DESFire card read content. Click Parameter Settings → Card Settings to enter the settings page. Select Enable DESFire Card and DESFire Card Read Contentand click Save.

  • Page 136: Privacy Settings

    DS-K1T343 Series Face Recognition Terminal User Manual After enabling the remote verification, when authenticating, the device will upload authentication information to the platform, and the platform will confirm whether to open the door. Verifying Person Type Remotely Select Verifying Person Type Remotely.
  • Page 137 DS-K1T343 Series Face Recognition Terminal User Manual Click Access Control → Access Control → Parameter Settings → Privacy Settings . Check the displayed contents in the authentication result, such as picture, name, employee ID. Check Name De-identification and ID De-identification according to actual needs. After de- identification, the name and the ID will display parts of contents.

  • Page 138: Call Settings

    DS-K1T343 Series Face Recognition Terminal User Manual Set PIN Mode via PC Web Make sure the PIN is platform-applied personal PIN or device-set personal PIN before settings. If the PIN is device-set personal PIN, you can edit the PIN on the device or PC Web, but not set it on the platform.
  • Page 139 DS-K1T343 Series Face Recognition Terminal User Manual Figure 10-1 Device No. Settings If set the device type as Door Station, you can set the Floor No., Door Station No., Community No., Building No., and Unit No. Device Type The device can be used as a door station or outer door station. Select a device type from the drop-down list.
  • Page 140 DS-K1T343 Series Face Recognition Terminal User Manual Set the device building No. Unit No. Set the device unit No. Note If you change the No., you should reboot the device. Click Save to save the settings after the configuration. If set the device type as Outer Door Station, you can set outer door station No., and community Outer Door Station No.
  • Page 141 DS-K1T343 Series Face Recognition Terminal User Manual Figure 10-2 Video Intercom Network After configuration, you can achieve communication between access control devices and video intercom door station, indoor station, main station, platforms, etc. Click Save. Set Communication Time via PC Web Set the max.

  • Page 142: Call Priority

    DS-K1T343 Series Face Recognition Terminal User Manual Note If you select Call Specified Indoor Station, you need to enter the Room No. of the indoor station. 3. Enable Link Authentication to Call according to your needs. After enabled, when person passes authentication, the door will be remotely opened by the target that is configured with button for automatic calling.

  • Page 143: Local Time And Attendance Settings

    DS-K1T343 Series Face Recognition Terminal User Manual 10.10 Local Time and Attendance Settings 10.10.1 Manage Department via Web You can add, edit and delete department information via Web. Steps 1. Click Person. 2. Click Add Department to add department. 1) Enter Department Name.

  • Page 144: Manage Shift

    DS-K1T343 Series Face Recognition Terminal User Manual Set the Mark as Early Leave if Checks out Early For time. For example, set the off work time as 17:30 and set the parameter as 10 min, the earliest check out time will be 17:20. Checking out at or earlier than 17:19 will be marked as invalid.

  • Page 145: Manage Schedule

    DS-K1T343 Series Face Recognition Terminal User Manual 4) You can enable Break, and set Break Duration. 3. Click Save. 10.10.5 Manage Schedule Shift Schedule by Department All persons in the department use the same shift schedule to take attendance. Before You Start Edit department.

  • Page 146: Manage Holiday Via Web

    DS-K1T343 Series Face Recognition Terminal User Manual 10.10.6 Manage Holiday via Web You can add, edit and delete holiday information via Web. Steps 1. Click Attendance → Time and Attendance → Holiday Management . 2. Click Add Holiday to add holiday.

  • Page 147: System Configuration

    DS-K1T343 Series Face Recognition Terminal User Manual 10.11 System Configuration 10.11.1 View Device Information via PC Web View the device name, device No., language, model, serial No., version, number of channels, IO input, IO output, lock, local RS-485 number, register number, alarm input, alarm output, and device capacity, etc.

  • Page 148: Change Administrator's Password

    DS-K1T343 Series Face Recognition Terminal User Manual Click Save to save the settings after the configuration. Time Zone Select the device located time zone from the drop-down list. Time Sync. You should set the NTP server's IP address, port No., and interval.

  • Page 149: View Device Arming/Disarming Information Via Pc Web

    DS-K1T343 Series Face Recognition Terminal User Manual Steps 1. Click System and Maintenance → System Configuration → System → User Management → User Management → Account Security Settings . 2. Change the security questions or email address according your actual needs.
  • Page 150 DS-K1T343 Series Face Recognition Terminal User Manual Figure 10-7 TCP/IP Settings Page Set the parameters and click Save to save the settings. NIC Type Select a NIC type from the drop-down list. By default, it is Auto. DHCP If uncheck the function, you should set the IPv4 address, IPv4 subnet mask, IPv4 default gateway, Mac address, and MTU.
  • Page 151 DS-K1T343 Series Face Recognition Terminal User Manual Steps Note The function should be supported by the device. 1. Click System and Maintenance → System Configuration → Network → Network Settings → Wi- Fi . Figure 10-8 Wi-Fi Settings Page 2. Check Wi-Fi.
  • Page 152 DS-K1T343 Series Face Recognition Terminal User Manual Enable/Disable HTTP Enable the HTTP function to improve the broswer's visiting security. Go to System and Maintenance → System Configuration → Network → Network Service → HTTP(S) . ClickSave after parameters are configured.
  • Page 153 DS-K1T343 Series Face Recognition Terminal User Manual Set ISUP Parameters via PC Web Set the ISUP parameters for accessing device via ISUP protocol. Steps Note The function should be supported by the device. 1. Click System and Maintenance → System Configuration → Network → Device Access → ISUP .
  • Page 154 DS-K1T343 Series Face Recognition Terminal User Manual Figure 10-9 Set OTAP 2. Click to Enable OTAP. 3. Set Server IP Address, Port, Device ID and Encryption Key. 4. Click Test to ensure the device can connect to the server and register successfully. Refresh the page or restart the device to see the Register Status.

  • Page 155: Set Video And Audio Parameters Via Pc Web

    DS-K1T343 Series Face Recognition Terminal User Manual Note 8 to 32 letters (a to z, A to Z) or numbers (0 to 9), case sensitive. You are recommended to use a combination of no less than 8 letters or numbers.

  • Page 156: Access Configuration

    DS-K1T343 Series Face Recognition Terminal User Manual Click Save. 10.11.9 Access Configuration Set RS-485 Parameters via PC Web You can set the RS-485 parameters including the peripheral, address, baud rate, etc. Click System and Maintenance → System Configuration → Access Configuration → RS-485 .
  • Page 157 DS-K1T343 Series Face Recognition Terminal User Manual Figure 10-10 Wiegand Page 2. Check Wiegand to enable the Wiegand function. 3. Set a transmission direction. Input The device can connect a Wiegand card reader. Output The can connect an external access controller. And the two devices will transmit the card No.

  • Page 158: Image Parameter Settings

    DS-K1T343 Series Face Recognition Terminal User Manual 10.11.10 Image Parameter Settings Figure 10-11 Display Settings Figure 10-12 OSD Settings Set Brightness/Contrast/Saturation/Sharpness via PC Web You can set picture information such as brightness, contrast, saturation and sharpness of live view page.

  • Page 159: Linkage Settings

    DS-K1T343 Series Face Recognition Terminal User Manual Drag the block or enter numbers to set brightness, contrast, saturation and sharpness. Click Restore Default Settings to restore the to the default. Set LED Light via PC Web You can adjust the brightness of the supplement light.

  • Page 160: Time And Attendance Settings

    DS-K1T343 Series Face Recognition Terminal User Manual - Select Linkage Type as Event Linkage, you can select event types according to your actual needs. - Select Linkage Type as Card Linkage, enter Card No. and select Card reader. - Select Linkage Type as Link Employee ID, enter Employee ID and select Card reader.
  • Page 161 DS-K1T343 Series Face Recognition Terminal User Manual 3. Enable the Attendance Status Required and set the attendance status lasts duration. 4. Enable a group of attendance status. Note The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required.

  • Page 162: Preference Settings

    DS-K1T343 Series Face Recognition Terminal User Manual Steps 1. Click System and Maintenance → System Configuration → Platform Attendance to enter the settings page. 2. Set the Attendance Mode as Manual and Auto. 3. Enable the Attendance Status Required function.

  • Page 163: Set Sleep Time Via Pc Web

    DS-K1T343 Series Face Recognition Terminal User Manual Set the standby images as default image or customized image. SelectCustom, and click + to upload a standby picture from the local browse. Note No more than 3 picture(s) are allowed. Single picture size: no more than 1024 KB; format: jpg.

  • Page 164: Set Notice Publication Via Pc Web

    DS-K1T343 Series Face Recognition Terminal User Manual Simple After selecting this mode, the live view of the authentication page will be disabled. The person's name, employee ID, face pictures will all be hidden after authentication. 3. Click Apply. 10.12.4 Set Notice Publication via PC Web You can set the notice publication for the device.

  • Page 165: Set Prompt Schedule Via Pc Web

    DS-K1T343 Series Face Recognition Terminal User Manual Play Schedule After you have created a theme, you can select the theme and draw a schedule on the time line. Select the drawn schedule, and you can edit the exact start and end time.

  • Page 166: Customize Prompt Voice Via Pc Web

    DS-K1T343 Series Face Recognition Terminal User Manual 2) Set the time duration. Note If authentication is succeeded in the configured time duration, the device will broadcast the configured content. 3) Set the audio prompt content. 4) Optional: Repeat substep 1 to 3.

  • Page 167: Set Authentication Result Text Via Pc Web

    DS-K1T343 Series Face Recognition Terminal User Manual 10.12.7 Set Authentication Result Text via PC Web Steps 1. Go to System and Maintenance → Preference → Authentication Result Text . Figure 10-18 Authentication Result Text 2. Enable Customize Authentication Result Text.

  • Page 168: Restoration

    DS-K1T343 Series Face Recognition Terminal User Manual Online Upgrading via PC Web You can upgrade the device online. Click System and Maintenance → Maintenance → Upgarde to enter the settings page. ClickCheck for Updatesto check whether there is updated versions.

  • Page 169: Export Device Parameters Via Pc Web

    DS-K1T343 Series Face Recognition Terminal User Manual 10.13.4 Export Device Parameters via PC Web Export device parameters. Go to System and Maintenance → Maintenance → Backup and Reset . Backup Click Export to export device parameters. Note Export device parameters and import those parameters to other devices.
  • Page 170 DS-K1T343 Series Face Recognition Terminal User Manual Capture Network Packet via PC Web Set the capture packet duration and size and start caputre. You can view the log and debug according to the capture result. Go to System and Maintenance → Maintenance → Device Debugging → Log for Debugging .
  • Page 171 DS-K1T343 Series Face Recognition Terminal User Manual Figure 10-20 Network Diagnosis Enter the device IP for PING operation, select the network connection mode, PING duration, and Ping data package size (default parameter is recommended.) Click Diagnose. The result will displayed in PING Result.

  • Page 172: View Log Via Pc Web

    DS-K1T343 Series Face Recognition Terminal User Manual 10.13.7 View Log via PC Web You can search and view the device logs. Go to System and Maintenance → Maintenance → Log . Set the major and minor type of the log type. Set the start time and end time for searching, and click Search.

  • Page 173: Certificate Management

    DS-K1T343 Series Face Recognition Terminal User Manual 10.13.10 Certificate Management It helps to manage the server/client certificates and CA certificate. Note The function is only supported by certain device models. Create and Import Self-signed Certificate Steps 1. Go to System and Maintenance → Safe → Certificate Management .
  • Page 174 DS-K1T343 Series Face Recognition Terminal User Manual Steps 1. Go to System and Maintenance → Safe → Certificate Management . 2. Create an ID in the Import CA Certificate area. Note The input certificate ID cannot be the same as the existing ones.

  • Page 175: Chapter 11 Other Platforms To Configure

    DS-K1T343 Series Face Recognition Terminal User Manual Chapter 11 Other Platforms to Configure You can also configure the device via iVMS-4200 Client Software or HikCentral Access Control. For details, see the platforms' user manual. iVMS-4200 Client Software Click/tap the link to view the client software's user manual.

  • Page 176: Appendix A. Tips For Scanning Fingerprint

    DS-K1T343 Series Face Recognition Terminal User Manual Appendix A. Tips for Scanning Fingerprint Recommended Finger Forefinger, middle finger or the third finger. Correct Scanning The figure displayed below is the correct way to scan your finger: You should press your finger on the scanner horizontally. The center of your scanned finger should align with the scanner center.
  • Page 177 DS-K1T343 Series Face Recognition Terminal User Manual Environment The scanner should avoid direct sun light, high temperature, humid conditions and rain. When it is dry, the scanner may not recognize your fingerprint successfully. You can blow your finger and scan again.

  • Page 178: Appendix B. Tips When Collecting/Comparing Face Picture

    DS-K1T343 Series Face Recognition Terminal User Manual Appendix B. Tips When Collecting/Comparing Face Picture The position when collecting or comparing face picture is as below: Positions (Recommended Distance: 0.5 m) Expression Keep your expression naturally when collecting or comparing face pictures, just like the ●...
  • Page 179 DS-K1T343 Series Face Recognition Terminal User Manual Size Make sure your face is in the middle of the collecting window.

  • Page 180: Appendix C. Tips For Installation Environment

    DS-K1T343 Series Face Recognition Terminal User Manual Appendix C. Tips for Installation Environment 1. Light Source Illumination Reference Value Candle: 10Lux Bulb: 100~850Lux Sunlight: More than 1200Lux 2. Avoid backlight, direct and indirect sunlight...

  • Page 181: Appendix D. Dimension

    DS-K1T343 Series Face Recognition Terminal User Manual Appendix D. Dimension Figure D-1 Dimension...
  • Page 182 UD29605B-C...

This manual is also suitable for:

Ds-k1t343mxDs-k1t343mwxDs-k1t343mfxDs-k1t343mfwxDs-k1t343exDs-k1t343ewx ... Show all

Table of Contents